What is the winding formula of motor coil?

There is no formula for motor winding.

The winding of the motor is wound into coils with a wire mold of appropriate size according to the required number of turns, and then the coils are embedded in the stator slots one by one, so that the wires can be embedded layer by layer, but the subsequent embedding is hindered, and the insulation between the coils also brings operational difficulties. Low-power motors usually adopt single-layer winding embedding, which is convenient, easy to insulate between coils and more beautiful in appearance.

Matters needing attention in winding motor coil

1. When winding coils, the coils of each pole group should be wound continuously as far as possible, which can reduce the number of joints and avoid the mistake of reverse connection.

2, winding should pay attention to the number of turns can't have error, otherwise it will directly affect the motor performance.

3. When the bobbin is placed on the spool, it should rotate flexibly and keep a certain distance from the winding machine. When the wire passes through the wire clamping plate, there should be a certain tension when entering the wire mold, so that the wire is straight and not bent. The tension should not be too tight or too loose, which will cause the wires to cross and be damaged.

Refer to the above? Baidu Encyclopedia-Volume I