What items are included in the wall soft package project?

Abstract: What are the soft package materials for walls? The soft texture and color of the materials used in the wall soft package can soften the overall space atmosphere, and its profound three-dimensional sense can also improve the home grade. The most common is KTV. When decorating at home, soft bags are often used in the bedroom background wall. Some people use soft bags in TV background walls and restaurants. Bian Xiao will share with you what materials and items are included in the wall soft bag. Let's have a look. What soft wall materials are there? What are the soft wall projects?

First, the wall soft package includes articles.

1, master project

The fabric, lining material and frame material, color, pattern, combustion performance grade and moisture content of soft-packed wood should meet the design requirements and the relevant provisions of the current national standards. The installation position and construction method of soft package engineering should also meet the design requirements. Keels, gaskets, widening, etc. of soft package engineering shall be installed firmly, without warping, and flat-fell seam shall be in a straight state. A single piece of soft cloth should not have seams, and it should be tightened around.

2. General items

The surface of soft package engineering should be smooth and clean, free from unevenness and wrinkles, with clear patterns and no color difference, and harmonious and beautiful as a whole. The soft package frame should be straight and the seams should be consistent. The coating quality of soft package surface should comply with the relevant coating regulations, and the allowable deviation and inspection method of soft package engineering installation should comply with the relevant regulations.

Second, the soft package wall materials and material requirements

1, the tree species, specifications, grades, moisture content and anti-corrosion treatment of wood such as wooden frame, keel, floor and panel of soft package wall must meet the requirements of design drawings and the provisions of Code for Construction and Acceptance of Timber Structure Engineering.

2. Filling materials such as soft package profiles must meet the design requirements, and should comply with the relevant provisions of fire protection design for interior decoration of buildings.

3. The keel material is generally dried with red and white pine, the moisture content is not more than 12%, the thickness should be according to the design requirements, and there should be no defects such as decay, scarring, splitting and distortion, and anti-corrosion treatment should be done in advance.

4. Panels are generally made of plywood (plywood), with a thickness of not less than 3mm and similar colors and patterns as far as possible. When using log boards as panels, dry hard miscellaneous wood such as red and white pine, basswood and ash are generally used, and the moisture content is not more than 12%. Its thickness is not less than 20mm, and it is required that the texture is straight, the color is uniform, the pattern is similar, and there can be no knots. Deformation, cracks, discoloration and other defects.

5. Fabrics such as battens, frame materials and wood veneer materials used for exterior decoration are generally semi-finished products processed and dried by factories, with moisture content not greater than 65438 02%, thickness meeting the design requirements and good appearance; And after anti-corrosion treatment.

6. Accessories include moisture-proof paper or linoleum, latex, nails (the length of nails should be 2-2.5 times the thickness of the surface layer), wood screws, wood sandpaper, sodium fluoride (the purity should be above 75%, and its viscosity should pass through the 120 sieve) or petroleum asphalt (generally used 10 and 30 construction petroleum asphalt).

7. If the design adopts light partition wall, its base, surface layer and other filling materials must meet the design requirements and be used together.

8, covering materials and practices must comply with the requirements of design drawings, and comply with the relevant provisions of the building interior decoration design fire protection.