How is the toilet glazed?

The glaze slurry is applied to the surface of the molded toilet blank. There are three main methods: manual glazing, mechanical glazing and electrostatic glazing.

(1) Manual glazing

Under the condition of stirring, a certain pressure (2Pa) is applied to press the glaze slurry into the spray gun from the pipeline, and the glaze slurry is pressed out by compressed air with a pressure of 4Pa on the spray gun towel and sprayed on the green body. When glazing, the glaze slurry will lose some water. The dried green body will quickly absorb the water just sprayed on the surface and the glaze on the surface.

(2) mechanical polishing

Glazing manipulator works by imitating manual glazing, but its production speed is 20% faster than that of skilled glazing workers. -The average output is: 500 washing machines per shift; Or 400 toilets. One person can load blanks and unload products on two machines at the same time, and change colors and patterns, all of which can be done quickly.

(3) Electrostatic glass

The electrostatic glazing device can be installed next to the glazing line (conveyor belt) to glaze the blank on the conveyor belt. The general electrostatic glazing device is equipped with nine spray guns, which can spray glaze by atomization. The sprayed fog particles are smaller and slower than ordinary glaze spraying. Some of the mist particles are sprayed out of the surface of the green body, but most of them are attracted to the surface by the green body under the action of magnetic field, forming a glaze layer. The voltage is generally controlled at100000 v.

For more information about how to glaze toilets, please visit:/ask/97635d1615736843.html? Zd view more content