Urgent! ! Urgent! ! Urgent! ! Master who worked as a machining center in a mold factory, please come in.

Mold processing is higher than timely technology. However, as long as the accuracy is within the tolerance range of the parts, the processing steps are all compiled by the technologist (which is generally the case in large factories). For example, the mold base has national standards. General factories can purchase directly according to the size of molded parts and the parameters of equipment. Most of the complex and irregular curves in the molding part, since you learn mold, it is impossible to know what the machining center is for. Mold processing will also be processed in the processing center. Most of them are CNC lathes, milling machines, grinders, or Huazhong CNC, Hualaike, etc. The mold industry in Zhejiang, Pearl River Delta and other places is relatively developed, where as long as you are willing to learn, you will certainly develop ... As long as you choose the datum processing mold, the clamping is reliable and reasonable. Programming in big factories is written by special people.

I can tell you for sure that it depends on the size of the company. Anyway, the division of labor of state-owned enterprises is very fine, and programmers and craftsmen are specially set up to improve efficiency. But small businesses may give programming to operators. Don't worry, programming is generally simple and not difficult. The difficult curves are compiled by special software and controlled by computer, so don't worry. You said you studied molds. You must have some basic mold skills in it. Processing methods and steps are compiled by technicians. If you want to improve, you must remember the programs compiled by others, which will be good for you in the future. In fact, if you are familiar with most machine tools, you will know the basic parameters and machining accuracy of each machine tool. What enterprises want is definitely proficiency. If you have the opportunity to go to a special mold factory in the future, you'd better go to Gaopei. This is of great help to the future mold design. One thing is that you should not underestimate this clamping. If the installation is unreasonable, it will directly affect your accuracy. There is a lot of knowledge in it. Generally, CNC machine tools only need to set the knife. But ordinary machine tools are not. In fact, milling machines learn the most things, of course, it would be better if you knew how to program.