Installation method of shower of wall-hung boiler

Wall-hung boiler shower is one of the most basic forms of hot water supply in the family. When decorating a house, the installation method of the shower of the wall-hung boiler is also very important. The following are the basic installation steps of wall-hung boiler shower:

1. First of all, you need to buy the accessories needed to install the shower of the wall-hung boiler, such as water pipes, check valves, yuba, etc. First, determine the installation location, and it is required to be as close as possible to the water heater and not more than 5 meters away from the water pipe.

2. Before installation, please turn off the water and gas sources to ensure the safety during installation.

3. After selecting the installation location, accurately measure the distance and angle with tools that meet the requirements, then drill holes in the wall and make two big holes in the wall. It must be noted here that these two holes must be aligned with the water pipe holes, otherwise the subsequent installation steps will be difficult.

4. Put the through-wall screw into the hole and fix it with a screwdriver, and install the base of the wall-hung boiler on the screw.

5. Add a check valve between the base and the water pipe to fix the water pipe and connect it to the faucet under the condition of ensuring the stable flow and supply of hot water.

6. Then, install the shower head and set the water temperature switch as needed to ensure the convenience and comfort of the shower head after installation.

7. Finally, test the installation quality, turn on the water source to confirm whether the water pipe installation is smooth and there is no water leakage, then turn on the air source, slowly adjust the water temperature to ensure that the water temperature and flow rate meet the requirements, and at the same time conduct various tests to confirm the installation and use of the shower head of the wall-hung boiler.

In a word, the installation of wall-hung boiler shower needs professional installation tools and skills. For those who don't know the installation skills, it's best to ask a professional installation technician to install it for you to ensure the installation quality and safety.