Job Recruitment Website - Recruitment portal - Will it be toxic in the process of making car wax cream?

Will it be toxic in the process of making car wax cream?

Some are poisonous, some are not! If it is edible wax, it is harmless to human body; But if it is industrial wax, the mercury and lead contained in it are harmful to health.

Of course, it's best not to eat. Wax is an ester composed of higher fatty acids and higher monohydric alcohols, in which a small amount of free higher fatty acids, higher alcohols and higher hydrocarbons can exist simultaneously. For example, the main component of ash in China is wax ester; The main component of beeswax is palmitic acid beeswax ester.

After a few days in the hot sun with the window open, there is no smell. The whole process method and steps of car waxing:

The first step, car preparation before waxing: wash the car and then dry it. Wash the whole body of the car first, and wash away the dirt and dust outside the car body. After washing the car, spray asphalt cleaning agent.

Remember not to blindly use detergent and soapy water, because the sodium chloride contained in it will corrode the paint layer, wax film and rubber parts of the car body, make the paint surface lose luster and the rubber parts age. If there is no special car wash water, clean the vehicle with clear water, dry the body and wax it. Step 2: Wash the car and start polishing. Ordinary scratches can be removed by polishing, but deep scratches like those in the picture have proved impossible to remove, so we can only dilute them and make them look inconspicuous at first glance.

Thirdly, after polishing, a series of routine car washing procedures such as cleaning, wiping and vacuuming are carried out again. Finally, wax. When waxing, dip a proper amount of car wax with a sponge or towel, and then apply it evenly and thinly on the surface of car paint in a straight reciprocating way, paying attention to the size of half a meter square. Don't paint the car at once, and don't pour wax liquid on the car to scribble or circle. One operation should be completed continuously, and it is not allowed to stop coating; Generally, the wax layer should be polished with a new towel 5- 10min after being evenly coated, but the express wax should be polished while being coated.

Note: the car should be waxed in the shade to ensure that the body will not heat up. Because with the increase of temperature, the adhesion of car wax becomes worse, which will affect the waxing quality.