What are the requirements for standing position during the forging process?

The requirements for standing position during the forging process are: do not stand in a place where the burrs of the forging may easily fly out.

Notes during the forging process:

1. Heating equipment, forging equipment and many auxiliary tools must be used in forging production. Heating equipment mainly includes flame furnaces (oil furnaces, gas furnaces, etc.) and electric furnaces. The heating furnace and the hot workpiece radiate a large amount of heat energy, and the various fuels used in the flame furnace burn the slag and smoke produced, so ventilation and purification measures must be taken to avoid injury accidents.

2. Forging equipment mainly includes steam hammer, air hammer, die forging hammer, mechanical hammer, plywood hammer, spring hammer, belt hammer, crank press, friction press, hydraulic press, hole expander, roller Forging machine, etc. Various forging equipment impose impact loads on the workpiece.

Therefore, it is easy to damage the equipment and cause personal accidents. For example, if the piston rod of the forging hammer breaks, it will cause serious injuries. The vibration and noise generated by forging equipment during operation affect the human nervous system and increase the possibility of accidents.

3. There are many kinds of forging tools and auxiliary tools, especially hand forging and free forging tools, clamps, etc., which are usually placed at the work place at the same time and are often messy; and because tools are frequently replaced during work , increasing the difficulty of checking tools, and sometimes using inappropriate tools can easily cause injuries.

The transportation volume in forging production is very large, and various transportation equipment must be used. Accidents can easily occur if you are not careful. Forging is a collective operation, and each operator's technical level, mental state, and whether they strictly abide by the operating procedures directly affect the safety of the operation.