Acer Shadow Knight 4 How to Install win 10 System

What are the steps of Acer Shadow Knight 4 with win 10 system? Acer Shadow Knight 4 is an audio-visual entertainment book, 15.6 inches, pre-installed with Windows 10 Home Basic Edition 64 bit (64-bit Home Basic Edition), with a length of 363.4mm and a width of 255 mm. The processor adopts Intel Core i59 generation series, the CPU is clocked at 2.4GHz, with four cores/eight threads, the memory capacity is 8GB(8GB× 1)DDR42666MHz, and the hard disk is PCIeNVMe, 5 12GB. Equipped with NVDIAGE ForceGTX 1650 fever-grade discrete graphics card, with a memory capacity of 4GBGDDR5. Bian Xiao is here to share with you the graphic steps of Acer Shadow Knight 4 reloading win 10 system with a USB flash drive.

I. Preparatory work

1.8g or larger empty USB flash drive.

2. Making a pe boot disk: How to make a USB boot disk with a micro pe toolbox (UEFILegacy dual mode).

3.win 10 system download: ghostwin 1064 official installation disk v20 19.07 of computer company.

Second, Acer Shadow Knight 4 laptop reinstall win 10 system steps are as follows

1. After making the wepe startup disk, copy the iso image of win 10 system directly to the USB flash drive;

2. Insert the uefipe boot disk into Acer Shadow Knight 4 notebook computer, press F 12 to start the shortcut key after restarting, bring up the startup menu dialog box, and select the recognized U disk option, usually the name of the U disk or the word USB. For the new model, select EFIUSB item and press enter;

3. If there is no response by pressing F 12 and you need to restart, press F2 to enter the BIOS, find the F 12BootMenu, press Enter to select Enabled Enter to enable the startup shortcut key, then press F 10 to save and restart, and press F 12 to select the USB flash drive to start during the restart;

4. After entering pe, double-click the partition assistant on the desktop (lossless), select disk 1, and click Quick Partition. Choose the right one and don't delete it by mistake;

5. Set partition number, partition size and partition type for Acer Shadow Knight 4 laptop. It is recommended that the volume label of the system disk be above 60G. Since UEFI startup is selected, select GPT as the disk type, and click Start Execution after confirmation.

6. After the partition is completed, the GPT partition will have two ESP and MSR without drive letters, and these two partitions should not be moved. Then open this pc-micro PE toolbox, right-click the iso image of win 10 system, and select Load; If there is no loading option, right-click to open Mode-Explorer;

7. Double-click and double-click the installation system. Exe, run the installation tool, select the recovery partition, and the GHOWIMISO image path will be automatically extracted to win 10.gho, and then select the installation location, usually drive C, or judge according to the volume label or total size. After selection, click OK;

8. If this prompt pops up, don't worry, click Yes to continue;

9. This dialog box pops up. Select Restart and Boot Repair after completion, and then click Yes.

10, to this interface, it will take some time to install and deploy the win 10 system to disk C;

1 1. After the operation is completed, Acer Shadow Knight 4 laptop will automatically restart after 10 seconds. During the restart, the USB flash drive will be pulled out, and then the win 10 system components will be installed, driven and activated in the interface.

12. Finally, boot into the desktop of win 10 system, and the step of reinstalling win 10 system in Acer Shadow Knight 4 notebook is over.

Macro _Acer Shadow Knight 4 laptop is thus reloaded with win 10 system. If it is a uefi motherboard, it is recommended to reinstall the win 10 system in uefi mode.