Cutting method and practice of denim skirt

The cutting method and practical course of denim skirt are as follows:

1. First draw our front skirts on paper, draw a line from the bottom to the hem, then cut out our drawings and cut them along this line, so that we have two front skirts. Draw a new line from the center of the dart to the center of the gap between the front and the side front.

2. As can be seen from the yellow line below, the top of the skirt pattern is1.2cm. If it is cut off, it will be our belt. In this way, there are front, side and front belts of the skirt. Add 5 cm in the middle of the front of the collar, then add 2 cm at the bottom of the hem of each front, and increase the seam on the remaining edges.

3. Increase the hem at the bottom of the skirt back by 2 cm, and then increase the sewing amount at other edges. Sewing of belt.

4. Prepare our skirts, fold 1.2 cm on the other side of the front edge in the middle of the knife, then press it down, put in a 2 cm wide interlining strip, and rearrange the edges.

5. At the bottom of each socket, make it on the right side, with the front part in the middle, and sew a collar on the bottom.

6. Now sew our belt, fix it on the waist of the skirt, and sew it. Press the suture on the belt.

7. Sew a twill on the edge of the belt. Then fix the belt together. Then sew it up.

8. Finally, press our button and it's done!