Compared with Quansheng TG-UV2, Jie Bao BJ-UV88 (or UV99) seems to have many functions. I want to buy an entry-level machine to play with.

BJ-UV88 is a new multi-band multifunctional wireless walkie-talkie built by Quanzhou Jie Bao Electronics Co., Ltd. for HAMs. The most remarkable feature of this machine is its wide working frequency range, except 87–108 MHz, which can receive FM broadcasts. It can also work in four frequency bands: 136- 174MHZ, 350-390MHZ, 400-470MHZ and 480-520MHZ. At the same time, it also has the functions of dual-band dual-frequency point display, dual-frequency point waiting in the same frequency band and different frequency bands, cross-band transceiver, DTMF signaling system, caller ID code display, group call, group call and so on.

The main functions are as follows:

1. Operating band

Fm87–108 MHz (receiving)

VHF136–174 MHz (receiving/transmitting)

UHF 0 350–390 MHz (receiving)

Uhf1400–470 MHz (receiving/transmitting)

Uhf2 480–520mhz (receiving)

Working modes: frequency mode and channel mode.

Digital tuned FM radio

Dual-frequency point display

Feel free to choose U/U, V/V, U/V, v/u.

Two-stage operation

Double-frequency point waiting in any frequency band

Dual-tone multi-frequency signaling system

Remote and on-site alarm

Group Call, Group Call and Selective Call

Patrol, monitoring, remote stunning and remote shooting functions

50 groups of standard CTCSS,

105 Distribution Center

Non-standard analog mute (arbitrary editing from 60 Hz to 259.9 Hz)

Send mute and receive mute are set separately.

The transmission power is high or low. When transmitting, press the alarm button to switch the transmission power at will.

Start timeout limit

Step frequency of 5 steps (5K, 6.25K, 10K, 12.5K, 25K).

Multiple power saving modes

VOX acoustic emission

Optional channel bandwidth (broadband/narrowband)

Do not send when the channel is busy.

Low electro-acoustic lamp warning

Automatic backlight

Automatic/manual keyboard lock

Three-color adjustable emission backlight

The receiving backlight of three colors is adjustable.

Three colors of standby backlight can be adjusted.

Three channel display modes (frequency, channel number and channel name)

ANI identification code display (caller ID)

Call ringing

DTMF side tone switch (automatic code sending, keyboard code sending, automatic+keyboard code sending)

Three scanning modes (time, carrier and search)

PTT-ID function (you can choose to press PTT code, release PTT code and press release unified code).

Multiple mute modes (mute, mute and optional signal, mute and optional signal)

The frequency difference direction can be selected in frequency mode.

In frequency mode, the frequency difference frequency can be selected between 0–69.9875 MHz.

Menu item keyboard number direct election function

Quick search function of frequency, channel and menu item.

Channel parameters can be edited and stored in frequency mode.

128 storage channels

Frequency reversal function (transceiver frequency reversal)

U/V cross-section transceiver access cross-section relay function

Wired replication

computer programming

Q: How does UV2 pass the inspection?

Answer: UV2 is a two-stage machine specially designed for amateur radio enthusiasts. UV2 has been licensed by the Ministry of Information Industry, and its operating frequency is144-147mhz 430-440mhz, with FM radio, and the operating frequency meets the requirements. To pass the inspection, there must be a fuselage code on the back of the machine, and then the machine must be restored to the original amateur frequency by the following operations, as follows:

One: press the band key to turn on and off the 350 MHZ transmission ban (at this time, press the PTT screen prompt: "DIS" to prohibit transmission), and the password is 350390.

Two: Turn off the power, press and hold the launch key and the MON key to turn on the power, and after 3 seconds, hear the "Didi" release button twice. At this point, your hand station becomes a tertiary machine with the frequency range as follows:

F0 88.000 - 108.000

f 1 144.000- 147.995

F2 430.000 - 433.995

F3 434.000 - 436.995

F4

In this way, the scope of the five-stage machine has completely become the original three-stage machine (88- 108,144-148,430-439).

Shut down the machine and repeat the operation. When you hear the sound of "drip", release the button and you can completely return to the original five-stage mode.

This is just some information for comparison.

Jie Bao's poor sales in recent years is not a quality problem, it has many functions, which is not a problem. However, if there are many buyers, of course, it depends on sales. If Quansheng tg-uv2 sells well, we can choose this one, but if I were you, I would choose Jie Bao because it has many functions. As for which one to choose, it depends on what LZ thinks.