What are the safety operation requirements for ordinary toothless sawworkers?

1, before driving, check whether the machine tool protective cover is complete and firm, and whether one brake leaks air, and solve the problem immediately before driving.

2, pay attention to check the workplace, such as flammable and explosive materials near the machine tool, when there is danger, must be removed immediately before operation.

3. Before driving, check whether the grinding wheel is firmly installed and whether there is a gap between the grinding wheels, and correct the problems in time when found.

4. During operation, the grinding wheel should contact the workpiece slowly, so that the grinding wheel can cut the workpiece evenly and effectively after normal contact with the cutter.

5. It is forbidden to cut magnesium alloy on the grinding wheel blanking machine.

6, when the grinding wheel blanking to do protective measures, so as to avoid flying out of the sand and iron filings when blanking hurt others.

7. Replacing the new grinding wheel shall conform to the general safety regulations of the grinder. The clamping plate of grinding wheel should be suitable and not less than one third of the diameter of grinding wheel.

8, it is forbidden to grind metal tools on the toothless saw, in order to avoid the grinding wheel rupture cuts.

9, toothless saw to post operating specifications, and number processing.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd