Wenling recruitment drilling machine

Hello!

Whether it is an ordinary lathe (ordinary lathe) or a CNC lathe (CNC lathe), its principle is the same.

However, picking silk on ordinary cars is a technical activity, and CNC cars are relatively simple, so it is enough to make up the program to repair the knife. Generally speaking, there is wire cutting on the bus, but there are exceptions, depending on what kind of work you are dealing with. I once processed triangular threads with a pitch of 3mm and a length of 50mm on an ordinary car. It's just that I used a carbide turning tool, so I turned 800 turns, which is a high-speed wire rod. As for CAD, CAXA and other series of drawing software, they are the most basic and simple. If you want to consider your future, I suggest you learn ordinary cars first, because ordinary cars are the most difficult to learn in the mechanical industry and the most technical. The so-called change can not be separated from it, as long as you learn the general car, whether it is milling machine, planer, grinder, drilling machine, CNC car, CNC milling, machining center and so on. As long as you are familiar with it, you will be fine. I am a student of Yantai Engineering Vocational and Technical College, majoring in numerical control. The CNC systems I know now include guangzhou cnc 980TD, FANUC0i system, Huazhong CNC 2 1 Century Star, and so on, and so can ordinary cars. But the industry I am in contact with now is gear processing, because I have lost interest in ordinary cars and numerical control. At that time, I was in a Japanese-owned enterprise, and I left because the processed workpiece was too simple to learn anything there.

Well, my friend, what I want to say is that for a better future, it doesn't matter whether you are bitter or tired now. The most important thing is to learn technology well. I have the ability to open my own factory in the future. Well, good luck:)