What should I do if the watch fogs after Hangzhou Omega watch is repaired?

Hello, I suggest that you can open the attached warranty when you buy a watch. Under normal circumstances, there will be a service address on the warranty, or find the address of a regular watch service center for testing and maintenance. I know a shop with good maintenance and service: Room 2606, Block B, China Resources Building, Qianjiang Road, Hangzhou.

The fog on the watch indicates that there is moisture in the watch. Generally, if there is a small amount of moisture in the watch, it is invisible to the naked eye. Although there is a watch seal, the fine holes in the alignment between the handle and the handle, the joint between the back cover and the shell, and the joint between the cover and the shell, especially in the old watches, will become larger. When washing hands, washing or encountering rainy days, moisture can penetrate into the shell from this pore. In addition, due to the high temperature and humidity in summer, when the watch suddenly gets cold, the air with more water in the watch will condense into fog or water droplets and be buried in the surface glass.

If there is fog or water droplets in the watch, please prepare it in time, wipe off the fog or water droplets, or wrap the watch tightly with toilet paper or flannel, and bake it near the 40-watt bulb (about 5 cm) for 30 minutes, and the water in the watch will turn into steam. In addition, remove the fog by sunbathing, and put paper towels or flannel around the handle for about 5 hours. Paper towels or flannel plugs can remove moisture from the gas, so that water does not enter for a long time. Occasionally there is a little fog, and the dry climate naturally disappears.