The rate at which the water heater ticks four times.

The energy rate of the water heater does not ring 4 times, which is generally the problem of the sensor. This is because the sensor in the energy rate water heater can sense the water temperature of the water heater and the temperature of the flue, and control according to this information to ensure the normal operation of the water heater. If there is something wrong with the sensor, it will cause the energy efficiency ratio water heater to ring 4 times.

The solution of this kind of fault usually needs professional maintenance personnel to carry out maintenance and debugging. First of all, it is necessary to check whether the sensor is loose or covered with dirt, resulting in abnormal signal. If the sensor fails, it needs to be replaced. However, before replacement, the possibility of other faults, such as unstable water pressure or valve failure, must be ruled out. If there are still 4 ticks after other faults are eliminated, the sensor needs to be replaced.

In addition, in order to avoid the fault code of the energy rate water heater, the following matters should be paid attention to during use: regular maintenance, avoiding the use of sewage, avoiding long-term power failure, paying attention to the adjustment of water pressure and gas volume, and avoiding excessive use. This can effectively prolong the service life of the energy rate water heater and avoid faults.