Precautions for installing sliding door track

Many families choose sliding doors for partitioning, so the sliding door track is an important issue at this time, which not only allows the space to be planned, but also makes the overall light more transparent. But many people don’t know what a sliding door track is. Next, the editor will take you through the precautions for installing the sliding door track, the cleaning and maintenance skills of the sliding door track, and the installation method of the sliding door track.

1. Precautions for installation of sliding door track

1. Before installing the sliding door track, you need to discuss with the carpenter in advance to reserve the installation position for the sliding door and plan the reserved space. And make door covers. It is also necessary to make precise measurements of the place where the sliding door will be installed to avoid mismatching the dimensions.

2. Be especially careful when installing the sliding door track, and pay attention to protecting the surrounding finished decoration. For example, when installing the track, be careful if the cutting machine cuts into the ground material, which will make it difficult to repair. Do not make the sliding door track too wide. If it is too wide, the stability of the sliding door will not be high, it will easily shake when used, and it will also affect the service life of the track.

3. The thickness of the sliding door track frame profile should not be too thin. The thickness of the frame should generally reach 1.2mm-1.5mm, so that it will not shake and be relatively stable. In order to make the design of the sliding door more beautiful, some manufacturers use low-quality cold-rolled steel plates and formed carbon steel profiles to make the door edges. The profile thickness is less than 1mm.

4. After the sliding door is installed, it is necessary to check whether the door as a whole is easy to push and pull, whether it can be operated freely, and whether it can be closed tightly. If the sliding door installed between the kitchen and dining room cannot be closed tightly, a large amount of oil smoke will escape and pollute other living rooms.

2. Cleaning and maintenance skills for sliding door tracks:

1. Regularly clean the surface of the sliding door with a soft cloth dipped in water or neutral detergent. Do not use ordinary soap and washing powder. Do not use strong acid and alkali detergents such as scouring powder and toilet detergent for cleaning. If the main body of the sliding door is made of board material, the wet rag used during cleaning should be wrung out and wiped.

2. Do not use sandpaper, wire brushes or other abrasive materials for scrubbing. Especially where there are cracks and dirt, use a soft cloth dipped in alcohol to scrub.

3. Clean the slide rail grooves regularly to keep the sliding door opening and closing smoothly. The sliding door pulleys are divided into upper and lower pulleys. The pulleys are the soul of the entire inner door. It is recommended to apply a drop or two of lubricating oil every six months or so to keep them smooth. Of course, if the pulley slides with needle bearings, there is no need to add lubricating oil, just pay attention to cleaning the debris.

4. In addition to the track, the sliding door also has sealing strips and glass seals, which are key structures to ensure the sealing and sound insulation of the sliding door. If it falls off, it must be repaired and replaced in time.

3. What is the installation method of sliding door track?

1. Before installing the sliding door track, it is necessary to accurately measure the place where the sliding door is installed to avoid installing the door at the door. The size was found to be inappropriate, causing unnecessary losses. The most common material for sliding doors is aluminum alloy. Aluminum alloy and glass have different quality levels, and the final price gap will be huge. The choice of aluminum alloy material is also critical, as it determines the quality and appearance of the sliding door in the future. Sliding doors are mainly composed of frames, glass, tracks, etc. The sliding doors are mostly made of aluminum alloy and the door body is made of glass. Glass includes transparent glass, translucent glass and colored glass, etc. The prices of different glasses are different.

2. Be especially careful when installing the sliding door track. Pay attention to protecting the surrounding finished decoration. For example, when installing the track, be careful that the cutting machine cuts into the ground material, causing injuries that are difficult to repair, which not only affects the Aesthetics may bring more trouble. After the sliding door is installed, it is necessary to check whether the door as a whole is easy to push and pull, whether it can be operated freely, and whether it can be pulled together; if the sliding door installed between the kitchen and the living room or dining room cannot be pulled together, there may be a large amount of noise when cooking. The fumes escape and pollute other living rooms.

The above is all about the sliding door track today. You must have some understanding of the sliding door track. I hope this article can bring you some help.