Please ask heroes how to stick the side lacing of the fish tank, and how to stick it mainly.

It's beautiful when you hit it along a line, and you can't stop. The force should be even, and it should be hit in place at one time to ensure beauty.

1-first of all, you should be able to use a glue gun;

2- determine the width of your glue, that is, the width of the gap;

3- according to the width of your glue joint, cut the glue nozzle into a slightly smaller caliber than the gap;

4- Do a good job of protecting both sides of the glue gap, and stick 2-3CM adhesive tape on the glass, profile and stone on both sides of the gap, which will protect the glass, profile and stone on both sides, and it is also convenient to correct the glue in the gap;

5- Grasp the speed of gluing and the moving speed of the glue gun, and move the glue gun evenly according to the depth of the gap;

6- repair the gluing area, find the uneven place scraped by the shovel, and repair the glue where there is no gap when gluing;

After 7-48 hours, remove the adhesive tapes on both sides of the material to complete the construction.