Five steps of jewelry processing to create perfect jewelry

The sparkling jewelry we saw in the jewelry store, as well as various shapes and styles, were processed, designed, made and polished through many processes. So what is the process of jewelry processing? Let's take a look at the five processes of creating perfect jewelry.

Jewelry processing flow:

I. Design drawings

Jewelry designers will draw sketches of new works on paper, and also use pencils and gouache to complete the design drawings. This process will take at least a few days or half a month. If it takes a long time, it may take several months for a style to be finalized.

Second, hand-carved wax plates.

Artisans will carve wax plates by hand with reference to design drawings, which is also a demanding process in jewelry manufacturing. The wax plate must be smooth and seamless, the structure of each part should be reasonable, and the position and size of the inlaid gems should be accurate. This is a very delicate job. With the development of science and technology, there are fewer and fewer artificial jewels, most of which are drawn by computer CAD software.

Jewelry processing flow:

Third, reverse mold.

In the past, rings were made by lost wax casting, that is, the ring was made into its shape with a wax mold. If mass production is needed, it is necessary to make the wax plate into a silver plate, press it into a film, and then mass-produce the wax mold. If it's customized, it's even simpler. Go directly to the mold inversion process and plant wax trees first. The specific steps are as follows:

Planting wax trees-pouring gypsum-baking gypsum-pouring-sand blasting cleaning of gypsum mold-shearing castings.

Fourth, the mold.

Holding the mold is done by hand, and it is pushed back and forth on the jewelry surface with a special knife. This process requires certain skills and techniques.

Five, use stones

According to the design of jewelry, diamonds or precious stones are classified by hand, the appropriate colors are picked out, cut, matched in size and inlaid.

Jewelry processing flow:

Six, inlaid with precious stones

Every diamond and gem inlaid by hand is a technical job, and it needs to be inlaid dozens of times under a magnifying glass.

Seven, polishing, electroplating gold

Metal surfaces and details are further polished, and some jewelry needs gold plating to make it smoother.

Eight, quality inspection

Check the finished jewelry, if it is unqualified, it will be returned for re-making.

Let me sum up: the above is what I introduced to you about the jewelry processing flow and the five processes of creating perfect jewelry, hoping to help you. Don't look at a small piece of jewelry, it has gone through many processes before it is made and displayed in front of us.