How to apply for the qualification of fire engineering company

The qualification process of fire engineering company is as follows:

1, the fire engineering qualification certificate usually needs to be handled by the construction department at or above the prefecture level and the fire department of the prefecture-level fire brigade;

2. Enterprises that have obtained the qualification of fire control facilities engineering design and construction can engage in consulting, design, construction and integrated design and construction of fire control facilities engineering of various construction projects, and can also undertake general contracting and project management of corresponding projects; Including:

(1) automatic fire alarm and its linkage control system;

(2) Automatic sprinkler system;

(3) Water spray fire extinguishing system;

(4) Gas fire extinguishing system;

(5) foam fire extinguishing system;

(6) Automatic fire extinguishing system, such as dry powder fire extinguishing system;

(7) Automatic fire-fighting facilities of smoke control and extraction system;

3, to obtain the first-class qualification of enterprises, undertake the scale of fire control facilities is not limited;

4. Enterprises that have obtained Grade II qualification can undertake fire-fighting facilities projects for civil buildings with a single building area of not more than 40,000 square meters, and factories and warehouses with a fire risk of Class C or below.

The qualifications of the fire engineering company are as follows:

1, enterprise assets, net assets of more than 6 million yuan;

2. Key personnel of the enterprise:

(1) There shall be no less than 3 registered construction engineers in mechanical and electrical specialty;

(2) The technical director has more than 8 years' experience in technical management of fire control facilities engineering construction, and has the senior title of engineering sequence or the qualification of first-class registered constructor of electromechanical engineering; There shall be no less than 6 people with intermediate or above titles in HVAC, water supply and drainage, electrical and automation, with complete specialties;

(3) There shall be no less than 20 skilled workers at or above the intermediate level who have passed the examination or training;

(4) The technical director (or registered constructor) shall preside over the completion of not less than two engineering achievements required by the first-class qualification standard of this category.

The scope of qualification contracting works of fire engineering company is as follows:

1, a first-class enterprise, which can undertake the construction of various fire-fighting facilities;

2. Secondary enterprises can undertake the construction of fire-fighting facilities such as buildings with a building height of 100 meters or less and a building area of 50,000 square meters or less, flammable and combustible liquids and flammable gases production and storage devices;

3. Grade III enterprises can undertake houses with a building height of 24 meters or less and a building area of 25,000 square meters or less.

To sum up, when doing fire fighting construction, maintenance and fire fighting equipment sales and installation, you need to apply for fire fighting qualification. The qualification of fire protection facilities engineering contracting enterprises is divided into level one, level two and level three.

Legal basis:

Article 10 of People's Republic of China (PRC) Fire Protection Law

In accordance with the national technical standards for fire protection in engineering construction, the fire protection design review and acceptance system for construction projects shall be implemented.

Article 11

For special construction projects stipulated by the competent department of housing and urban-rural construction in the State Council, the construction unit shall submit the fire protection design documents to the competent department of housing and urban-rural construction for review, and the competent department of housing and urban-rural construction shall be responsible for the review results according to law.

For other construction projects other than those specified in the preceding paragraph, the construction unit shall, when applying for a construction permit or approving the commencement report, provide fire protection design drawings and technical data that meet the construction needs.

Article 12

Without the fire design review or review unqualified special construction projects, the construction unit, the construction unit shall not be constructed; For other construction projects, if the construction unit fails to provide fire protection design drawings and technical data that meet the construction needs, the relevant departments shall not issue construction permits or approve the commencement report.