Suogu Cable Recruitment

This standard has just come out, involving coal safety certificates. There are three kinds of machines, namely, load combustion tester, transition resistance tester and single cable vertical combustion tester. These three machines can meet the standard when used at the same time. I specialize in these three machines. We have made many mine cable load combustion testers, 05 12-82256088-8009, which are produced by our factory in Liu Lei.

Recommended by Shanghai Cable Research Institute and Coal Science Research Institute. It has been recognized by Wenzhou Yueqing Cable Association and purchased this equipment (such as Zhejiang Far East Cable Group and Zhejiang Xingle Cable Group). )? Shanghai Suogu Cable Group? , Jiangsu Fiona Fang Cable Group, Anhui Binjiang Cable Group and other well-known customers?

The picture shows the load combustion testing machine produced by our company.

These parameters are as follows

Cable combustion testing machine for coal mine

Product overview: This test-bed is based on MT? 386- 1995 "test methods and judging rules for flame retardancy of flame retardant cables for coal mines" standard, used to test MT? Combustion characteristics of 8 18-2009 cable for coal mine under overload condition.

Technical parameters:?

1, working voltage:? AC？ 380V 10%？ 50HZ

2. Combustion box size:1100× 525× 900 mm;

3. Electric cabinet size:1100× 525× 400 mm;

4. Load current: 10 ~ 5000a.

5. The height of the welding gun is adjustable, and the angle of the welding gun is 90;

6. Temperature measuring range: 0 ~1200℃ for K-type thermocouple;

7. Display range of temperature controller: 0 ~ 999.9.

8. Accuracy of temperature control instrument: 0.5.

9. Timer range: 0 ~ 99.99 seconds/meter/hour.

10, volume: 0.5m3, with exhaust device;

1 1, weight: 250kg

12, service environment temperature:-15 ~ 45℃? Relative humidity: (30 ~ 80)% RH；;

Product structure:

1, the product shell adopts stainless steel shell structure.

2. Torch part: H62 brass, 205 high, 9.5 mm inside diameter, equipped with automatic ignition device.

3. Current generation part: mainly based on large current transformer, closed-loop generation, supplemented by electronic current regulation module.