How to form straw for biomass power generation?

Straw curing molding technology takes agricultural wastes such as straw, wheat straw and corn straw as raw materials, which are crushed and compressed by special equipment straw briquetting machine to make solid biomass fuel that can be directly burned.

Cut or knead the straw to be pressed, the length is less than 50mm, and the water content is controlled within the range of 10 ~ 25%. The material is sent to the feed inlet by the feed conveyor, and the press roller is driven to rotate by the rotation of the spindle. After the press roller rotates, the material is pressed out of the model hole and falls from the discharge port. After cooling (water content cannot exceed 65438)

The solidified biomass pellet fuel has large specific gravity and small volume, which is convenient for storage and transportation. It is a high-quality solid fuel with a calorific value of 3,200-4,500 kcal, flammability, low ash content and low cost. It can replace firewood, raw coal and other fuels and is widely used in heating, domestic stoves, industrial boilers, biomass power plants and so on.

As a new type of commercial energy, straw briquette has been widely used in various industries. Moreover, because of its high density, high calorific value, regular shape and good fluidity, it is convenient to realize automatic combustion control and save a lot of energy costs for enterprises.