What is the density of aluminum bronze?

Question 1: What is the density of bronze? Wuxi Bronze 7.5-8.2g/cm3'

Tin bronze 8.7-8.9g/cm3'

Cold-drawn bronze 8.8g/m3

Rolled phosphor bronze 8.8g/cm3.

Question 2: What is the density of all metal materials? 6.6 ~ 7.4 Mn- deoxidized copper 8.89 gray cast iron

White cast iron 7.4~7.7 96 brass 8.85

Malleable castings 7.2~7.4 90 brass 8.73

Industrial pure iron 7.87 85 brass 8.7

Steel 7.85 80 brass 8.66

Cast steel 7.8 68 brass 8.5

Low carbon steel (containing 0. 1% carbon) 7.85 65 brass 8.5

Medium carbon steel (containing 0.4% carbon) 7.8263 Brass 8.45

High carbon steel (containing 1% carbon) 7.8 1.62 brass 8.5

High speed steel (containing 9% tungsten) 8.3 59 brass 8.4

High speed steel (containing 18% tungsten) 8.7 64-2 lead brass 8.5

Stainless steel (containing chromium 13%) 7.75 63-0. 1 lead brass 8.5

Copper 8.9 63-3 lead brass 8.5

1 copper, No.2 copper 8.9 60-3 lead brass 8.5

No.3 copper and No.4 copper 8.89 59- 1 lead brass 8.5

No.2 phosphorus-containing copper 8.89 59- 1A lead brass 8.5

1 No.2 oxygen-free copper 8.9 90- 1 tin brass 8.8

Phosphorus deoxidized copper 8.89 70- 1 tin brass 8.54

62- 1 tin brass 8.54 1.9 beryllium bronze 8.23

60- 1 tin brass 8.45 1-3 silicon bronze 8.6

77-2 aluminum brass 8.6 3- 1 silicon bronze 8.4

77-2A aluminum brass 8.6 3.5-3- 1.5 silicon bronze 8.8

77-2B aluminum brass 8.6 3.5-3- 1.5 ferrosilicon bronze 8.8

67-2.5 aluminum brass 8.5 1.5 manganese bronze 8.8

60- 1- 1 aluminum brass 8.4 5 manganese bronze 8.6

59-3-2 aluminum brass 8.4 1.0 cadmium bronze 8.8

66-6-3-2 aluminum brass 8.5 0.5 chrome bronze 8.9

58-2 manganese brass 8.5 0.2 zirconium bronze 8.9

57-3- 1 manganese brass 8.5 0.4 zirconium bronze 8.9

55-3- 1 manganese brass 8.5 0.6 white copper 8.9

59- 1- 1 iron brass 8.5 white copper 5.9

58- 1- 1 iron brass 8.5 19 white copper 8.9

80-3 silicon brass 8.6 30 white copper 8.9

65-5 nickel brass 8.65 3- 12 manganese white copper 8.4

4-3 tin bronze 8.8 40- 1.5 manganese white copper 8.9

4-4-2.5 Tin bronze 8.75 40-0.5 Manganese white copper 8.9

4-4-4 Tin bronze 8.9 30- 1- 1 iron white copper 8.9

6.5-0. 1 tin bronze 8.8 > >

Question 3: What is the usual density of a nickel-aluminum bronze propeller? The density of the nickel-aluminum bronze propeller is about 7.85.

Nickel-aluminum bronze generally refers to C95400, C95800, Cual9Fe4Ni4, Cual9Mn2, Cual9Ni3Fe2, Cual 10Ni5Fe4, and is usually cast by centrifugal casting and continuous drawing. Used for bearings, pawls, worm gears, mechanical parts, spur gears, heavy-duty worm gears, pump parts, Rongchang copper sleeves, etc. The material is equivalent to en1982c333g/bs1400ab2.

Question 4: What is the density of metallic titanium? 4.506-4.5 16g/cm3 (20℃)。

Question 5: What is the metal density of galvanized steel sheet? Although the density of zinc is lower than that of steel, the galvanized layer of galvanized steel plate is very thin, which has little effect on the density of galvanized steel plate, so the density of galvanized steel plate should still be ≈7.8 g/cm3.

Question 6: What is the density of metal? Osmium, the densest metal, with atomic number 76 and symbol Os, is a blue-gray metal element found in 1803, and exists in osmium iridium ore. The density of metal elements is the highest, which is 22.48× 103kg/m3. It's hard and brittle. If you pound it with an iron mortar, it will easily turn into blue-black powder. Osmium is very stable in air, with a melting point of 2700 degrees Celsius. Insoluble in ordinary acids, it will not be corroded even in aqua regia. However, powdered osmium will gradually oxidize at room temperature to produce osmium tetroxide. Osmium tetroxide will melt at 48℃ and boil at 130℃. Osmium vapor is highly toxic, which will strongly * * the human eye mucosa, and in severe cases, it will cause blindness. Osmium is used in industry to make catalysts. When synthesizing ammonia, if osmium is used as catalyst, higher conversion rate can be obtained at low temperature. If you add a little osmium to platinum, you can make a hard and sharp scalpel. The same amount of iridium can be made into osmium-iridium alloy, and the silver dot on the tip of iridium pen is osmium-iridium alloy. Osmium-iridium alloy is hard and wear-resistant, and iridium pen tip is more durable than ordinary pen tip. The key lies in this "little point". Osmium-iridium alloy can also be used as bearings for clocks and important instruments, which is very wear-resistant and can be used for many years without damage.

Question 7: What is the density of bronze? Material name density gram/cm 3 Material name density gram/cm 3 7 aluminum bronze 7.8 LD7, LD9, LD 10 2.8

19-2 aluminum bronze 7.6 superhard aluminum 2.85

9-4, 10-3- 1.5 aluminum bronze 7.5 LT 1 special aluminum 2.75

10-4-4 aluminum bronze 7.46 industrial pure magnesium 1.74

Beryllium bronze 8.3 wrought magnesium MB 1. 1.76

3- 1 silicon bronze 8.47 MB2, MB8 1.78

1-3 silicon bronze 8.6 MB3 1.79

1 beryllium bronze 8.8 MB5, MB6, MB7, MB 15 1.8

0.5 Cadmium Bronze 8.9 Cast Magnesium 1.8

0.5 chrome bronze 8.9 industrial pure titanium (TA 1, TA2, TA3) 4.5

1.5 manganese bronze 8.8 titanium alloys TA4, TA5, TC6 4.45

5 manganese bronze 8.6 TA6 4.4

Question 8: The formula for calculating the density and weight of aluminum bronze tubes and aluminum bronzes is that weight equals density times volume.

Question 9: What is the density of aluminum bronze c6 1300? There are many brands of aluminum bronze, such as CUAL 10FE3, CUAL9FE4 and so on. This is an ordinary aluminum bronze, which is often used in turbines and nuts. According to the casting experience of Jiashan Rongchang sliding bearing, aluminum bronze brands are (C60600, C64200, C60800). C6 1300，c6 1400，c6 1900，c62300，c63000，c63020，c63200，C65 100，cual 10fe。