Precautions for pneumatic drilling construction must be seen before construction!

At present, more and more mining and mountain opening enterprises use pneumatic drills, and pneumatic drills have become an indispensable tool. It is widely used in development at present. There are also many people who have started to develop. The use of pneumatic drills is also increasing. Next, Bian Xiao introduced the matters needing attention in the process of pneumatic drilling construction. Let's have a look!

A, pneumatic drill construction matters needing attention

There are post hazards such as mechanical injury, electric shock, object strike, dust and falling from a height in the operation of pneumatic rock drill. When working, be sure to abide by the relevant rules and regulations, the safety construction scheme of special projects and safety technical measures, memorize the operation points and their characteristics, and master the corresponding safety precautions; After entering the workplace, you must re-check and take effective measures in time to eliminate abnormal situations and unsafe factors; It is necessary to use and wear labor safety articles correctly, and at the same time, we must conscientiously implement joint insurance and mutual insurance. At the same time, the following targeted measures must be implemented regularly:

1, after the tunneling personnel arrive at the work place, they should first check whether the working face is in a safe state, whether the support is firm, whether the roof and two sides are stable, and if there are any loose earth-rock cracks, they should be removed or supported first.

2, mechanical drilling, appropriate uses wet rock drill or rock drill with dust collector.

3. When standing on the slag heap, pay attention to the stability of the slag heap to prevent slipping and hurting people.

4, pneumatic drill drilling, should first check the fuselage, bolts, fixtures, springs and brackets are in good condition; Whether the pipe joint is firm and whether there is air leakage; Whether the drill pipe is straight and the drilling hole is blocked; Whether the water supply of wet rock drill is normal; Whether the dust catching facilities of dry rock drill are in good condition. Do not meet the requirements should be repaired or replaced.

5. When drilling with a pneumatic drill with a bracket, the bracket must be firmly placed. When the pneumatic drill is stuck, it should be pulled out loosely with plate pliers, and knocking is not allowed. Do not remove the drill pipe before the pneumatic drill is turned off.

6, electric drill drilling should check the handle rubber sleeve insulation box, to prevent the wire from falling off. Electric drillers must wear insulating gloves and shoes. They are not allowed to guide the rotating steel bar by hand, and they are not allowed to handle the clamped nails with electric drills.

7, in the working face shall not be removed, repair the wind, electric drill.

Second, the pneumatic drill manufacturer recommended

The first company, Dongguan Chenyang Machinery Equipment Co., Ltd.:

The first manufacturer of pneumatic drills introduced by Bian Xiao was Dongguan Chenyang Machinery and Equipment Co., Ltd. .. 20 13 years. This company went to industrial and commercial registration for 600,000 yuan, with a workshop area of 1000 square meters and an annual turnover of1000 million. The company is located in Dongguan City, Guangdong Province, and is a professional manufacturer integrating R&D, production and sales. The company has a high-quality technical team and management talents, since its establishment. In order to improve the scientific and technological strength of our products, we have specially introduced some advanced production technologies such as Japanese Taiwan Province Province, so our products are in a leading position in the same industry.

The second company, Yongjia Lichao Automobile Co., Ltd.:

The second manufacturer of pneumatic drills introduced by Bian Xiao is Yongjia Lichao Motor Co., Ltd. In 2004, this company went to industrial and commercial registration for 500,000 yuan, with a workshop area of 3,000 square meters and an annual turnover of 50 million yuan. The main business performance of this company has always been a wide variety of products such as tankers and pneumatic drill pipes. Because the company's scientific and technological strength is very strong, the products produced have some advantages, such as low energy consumption, high efficiency and low noise, which are expected to have a long service life. After so many years of development, the products have been sold to more than 20 provinces and cities across the country, and have been trusted and praised by the majority of users.

Drill pipe is an indispensable tool in mining industry. The invention of pneumatic drill pipe helps people to improve production efficiency and work efficiency. More and more miners use pneumatic drill pipes to help complete the project. The above is all the information introduced by Bian Xiao. I hope it helps you.