When the washing machine is dehydrated, the plates turn and the barrels don't.

First, check the safety switch. When the washing machine is powered on, the program is adjusted to the dehydration state. Press the brake arm of the safety switch to the lowest position by hand or tool. If the computer board gives an alarm and the digital tube displays "E 1", the safety switch or computer board should be replaced at this time.

2.

If the brake arm of the safety switch can be dehydrated normally by hand or tools, it means that the power-off distance of the safety switch is low, and the safety switch should be replaced at this time;

3.

If only the pulsator does not rotate when the inner drum is dehydrated, please check whether the traction machine has separated the pawl and ratchet of the clutch. Otherwise, the adjusting rod nut on the drain valve may loosen and wear, resulting in insufficient opening distance. At this time, readjust the distance of the adjusting lever to separate the pawl and ratchet of the clutch.