What should be paid attention to in hydropower positioning

Furniture placement determines the location of water and electricity.

The water level in the room must be designed according to the arrangement of furniture. At the same time, we should plan the number of switch sockets and prepare 59 points for ourselves, which can fully meet everyone's needs.

Leave a few more lines in the bathroom.

If you want to make the bathroom warm and air-conditioned, you need to reserve 5-6 2.5-square wires more than the lamp when decorating.

Attention should be paid to the kitchen lights.

Bian Xiao suggested that you also install lighting above the sink and gas stove. Gas stoves are generally on the side of range hoods. If all your range hoods are equipped with spotlights, you don't have to install them. If you don't have one, consider installing one.

Multi-reserved socket

When designing switch sockets, we should not only consider what we need now, but also what we may use in the future, and reserve more sockets to avoid insufficient sockets in the future. For example, we can set several switch sockets next to the bathroom cabinet and so on.

Check whether the line meets the requirements.

Before water and electricity positioning, water pipes should be tested at home, and the property should be closed for 24 hours. At the same time, check whether the 1.5 square lighting line, 2.5 square socket line and 4 square air conditioning line at home meet the requirements, whether the socket is correctly installed with grounding wire and whether the circuits in each room are correct.