The decoration company must produce 1 1 drawings.

The owner must see-1 1 The decoration company must produce drawings.

Decoration must choose a formal and reliable decoration company. When we decide which decoration company to find for construction, the owner should pay attention. Before the decoration, the decoration company will produce many drawings, among which 1 1 drawings are essential. Below we will bring you 1 1 drawings that the decoration company must show to the owners, hoping to help the owners.

1, originally planned

It is the first drawing after measuring the house and the basis for drawing design drawings. Mainly indicate the size, height, original pipeline and doorway of the room type. The first thing that goes wrong is usually the original picture. If the size is not correct, the labor cost, material cost, management fee and design fee should be added. If you are worried about something fishy, you can roughly measure it with a tape measure when you get the drawings. Generally, the size will not differ much.

2. Layout plan

In the eyes of many people, reasonable planning and layout is the most test of the designer's design level. Indeed, the furniture layout of the floor plan is a top view, and it is the essence of the floor plan to reasonably divide the functions of each area and consider humanization. Of course, whether the size of the furniture in the drawing is accurate and whether the shadow will affect walking should be considered. And some inexperienced designers often don't consider these.

3. Schematic diagram of wall reconstruction

Designers generally use diagonal lines to represent demolished walls and solid thick lines to represent newly built walls, so that ordinary people can see the changes of the walls. It is worth noting that wall changes should refer to the original civil drawings, and load-bearing walls are generally not allowed to be changed at will. Nowadays, many new houses are full-frame structures, so it is relatively safe to remove the internal walls. Many people like to open the balcony when decorating, so don't ignore the load-bearing wall.

4, the ground material diagram

Generally, it is necessary to indicate the type of materials used on the floor, whether it is ceramic tile or floor, paving direction, pattern and boundary description of different materials. A good designer can generally count the number of floor tiles used in the floor material drawing, so that the budget can not be made, and the floor demand can be calculated on the drawing. Of course, these are rough estimates, and the actual consumption should consider the loss, but it can be used as a reference to see if the designer's calculation is correct.

5. Distribution map of sockets

Many owners will complain that the number of sockets at home is too small in the later use, which is because the distribution map of sockets was not considered clearly at the beginning. The location and number of sockets will be drawn on this picture. Of course, the layout of sockets should also avoid doors, windows and furniture, otherwise it will be white. Generally speaking, the installation of sockets is on the premise of ensuring enough, and then some spare parts can be set aside appropriately. Some decoration companies will add more sockets in order to increase their budgets, which also needs to be cautious.

6. Weak current distribution map

Audio cable, TV cable, telephone cable and network cable all belong to the weak current range, so their mutual interference should be considered when arranging. Nowadays, many families will consider smart home systems such as background music and lighting control when decorating. It is best for professional smart home companies to design and issue relevant wiring diagrams.

7, ceiling ceiling diagram

This picture can show the direction of the ceiling and the position of the ceiling light. The plane shape, size and height from the ground of the ceiling shall be marked in detail. Generally speaking, there are two ways to mark the ceiling size, one is the elevation from the ground to the top, and the other is the distance from the roof to the lower mouth of the ceiling.

8. Switch layout

Switch layout should indicate the location of the room from all switches, the electrical appliances and light sources controlled by each switch lock, and also indicate the types of switches to avoid confusion during installation. Sometimes the switch layout will be put together with the lighting plan, and more control channels can be set for commonly used lamps, which can save energy.

9, water supply layout

The layout of water supply and drainage lines in the bathroom and kitchen should be marked on the water supply map, and the specific distribution of cold and hot water should also be marked. If possible, try to let the decoration company provide free CD-ROM impact records, and mark the accurate construction location can also bring convenience to future maintenance.

10, node details

It is difficult to construct some key parts in the construction, so it is necessary to draw these drawings when designing some specific construction techniques, and indicate the modeling size and materials on the way. Generally, this kind of drawing is told to the construction personnel more, and the designer will explain it to the construction personnel.

1 1, elevation

The elevation shows the local area of the room from a horizontal perspective. Designers usually draw the facade of the main wall. The owner had better ask the designer to combine the elevation of other walls with the floor plan, so that it can be clearer.