The simplest inspection method of how to check and close the house.

The steps of house acceptance and house inspection are as follows:

First of all, the wall

1, check whether the wall is cracked.

2, check whether there is an empty drum on the wall, knock on the wall with a Xiao Mu hammer or other things, knock on the empty drum when the voice is not true, it is easy to hear. Mark it well and fill it with putty when decorating.

3. Check whether the putty on the wall is waterproof. You can bring a bottle of mineral water, splash water on the wall and touch it with your hands to see if there is mud on your hands. If not, it proves that the waterproof putty on the wall is qualified.

Second, the roof.

1. Check the roof for cracks.

2. Check whether the corner line of Yin and Yang on the roof and wall is horizontal. If not, in the future decoration, plaster gypsum should be used to find a lower level, and then water-resistant putty should be used for leveling.

Third, the ground.

1, check whether the ground is flat or not.

2. Check whether there are cracks and sand prevention: whether there are sand grains when rubbing the ground with your feet. This problem will occur if the mortar ratio or cement quality is unqualified and the mixing is uneven.

Fourth, doors and windows.

1, check the strength of doors and windows.

2, check the function of the window

A. The doors and windows shall be pushed and pulled smoothly, with smooth surface, no serious scratches, and no cracking or damage of profiles.

B. Hardware accessories: complete, correct and firm.

C sealing quality: when the doors and windows are closed, there is no obvious gap between the fan and the frame, and the sealing strip is not loose, falling off and exposed.

D. Door window frame, vertical fan, without bending.

E. The glass shall be free from pollution and damage, the double glass interlayer shall be dust-free and moisture-free, and the partition shall be flat.

F. whether the window drain hole has been opened. Dead water will flow into the profile.

Verb (abbreviation of verb) circuit

1, check whether the socket and switch settings are reasonable and whether the circuit needs to be modified during decoration. First, look at personal needs. Second, it depends on whether the socket and switch settings at home are reasonable and convenient.

2. Check whether each light switch and power socket can be used normally. You can use a mobile phone charger or an electric pen to check whether the power socket is electrified. Of course, professionals will use special sockets to check.