Standard configuration of image and video monitoring alarm anti-theft device

(3) A special power supply (4) Two remote controllers

(5) Universal bracket for lithium battery (6).

(7) Manual and (8) Warranty Card

Optional items:

(1) alarm extension (SMS extension or image extension)

(2) Enhanced external antenna

(3) Video line

(4) Remote control (the total number of standard configurations cannot exceed 10)

When purchasing this product, please carefully check whether the items in the box are complete (except optional items).

Series product version function difference version name main function is equipped with extended online function stand-alone version 1, and actively check the monitoring site.

2. Passive infrared alarm can be used without standard version 1. Take the initiative to check the monitoring site.

2. Passive infrared alarm

3. Emergency alert

4. Remote monitoring can be equipped with SMS extension and non-standard online versions such as wireless door magnet and wireless smoke sensor. As mentioned above, there are enhanced versions that can be equipped with SMS extensions and non-enhanced online versions such as wireless door magnets and wireless smoke sensors. As mentioned above, there is a note: online function-that is, when the alarm is triggered, not only the user can receive the graphic alarm information, but also the monitoring center with our professional security software can receive the alarm information (SMS or incoming call information) at the same time. This function is applicable to group users or collective users with property management centers. Main technical indicators of 1 and 5

Image format JPEG

Resolution 320X240/480X320

The shooting angles are 60 degrees (horizontal) and 60 degrees (vertical).

Effective shooting distance

Remote control effective distance

Backup battery power supply duration

Working temperature 0-50℃

Relative humidity 10-90%, no condensation. 2. Operating instructions. 2. 1 Description of main functions of alarm.

2. Active viewing function of 1 and1

(1) phone active viewing mode

Use a mobile phone with MMS/E receiving function to dial the SIM card number in the alarm host. After receiving the ringing signal, the alarm clock will automatically hang up, and then send the live pictures to the mobile phone and the first receiving mailbox you set.

Note: Telephone active viewing can only be used to view the monitoring site of the host. If you want to view the monitoring site of image expansion, you need to take the initiative to view it through SMS.

(2) SMS active viewing mode

The short message format is: password+number of pictures sent.

Send a short message to the SIM card number in the alarm host: "0000002".

The first six zeros are the factory default passwords, and 2 means that the host sends 2 pictures to the person who receives the alarm.

In the mobile phone and the first receiving mailbox.

Note: When there is no phone number to receive the alarm, any mobile phone with MMS /E function can directly call to actively check the scene; Set the phone number for the alarm. When receiving the alarm, only the super user can call to actively check the monitoring site, and the general user needs to enter the password to check the short message.

2. 1, 2 Passive infrared alarm function

In the case of protection, when someone invades and passive infrared triggers the alarm, the alarm will take three photos of the scene, send them to all your pre-set mobile phones to receive the alarm, and then make a circular call to further remind you. When the phone answers or refuses to answer, it will stop ringing, otherwise it will ring five times. If the time interval between this alarm and the last alarm is less than 10 minute, the alarm will only send live pictures without calling.

2, 1, 3 emergency alarm key function

In case of emergency, such as robbery and murder indoors, press the panic button on the remote controller for more than three seconds, and the alarm will automatically dial the preset WeChat official account and number to receive the emergency alarm; Send the scene pictures to the mailbox and emergency alarm number set by the user in advance to improve the safety factor of the user. In case of emergency alarm, the alarm will dial the number you set one by one to receive the emergency alarm until every phone you set is answered or hung up and refuses to answer, otherwise it will not be dialed after 5 times.

2, 1, 4 Remote monitoring function

When users want to monitor the scene outside, they can send a short message in the format of "000000T+ phone number or mobile phone number", and the alarm will dial the number after T within one minute. After the user answers, you can monitor the live sound. When the message content is "000000T", the alarm will dial the mobile phone number directly.

2, 2 alarm setting operation instructions

List of control symbols for various settings (1)N- Set password (2)M- Set phone number for receiving alarm (3)E- Set email address for receiving alarm (4)s 1/S0- Set alarm clock and light on/off (5)H- Set number for receiving emergency alarm (6) A655. Disarmament (7)D- View setting records (8)T- Remote monitoring function (9) 1-7- View images by SMS (10)C- Restore factory settings (1 1) U- SMS extension alarm content (/kloc

Users can set any number of setting items at one time, or set each setting item separately.

Matters needing attention in SMS setting

(1) Super users can set all function items without a password, while ordinary users need to use a password to operate.

(2) When the short message content is written in English format, it can't exceed 140 characters at a time, and when it is written in Chinese format, it can't exceed 70 characters (including numbers, letters and symbols) at a time, otherwise it will lead to setting errors.

(Control symbols in SMS commands and letters in e-mail addresses are not case-sensitive.

(4) Spacers can be spaces ","or "*".

(5) The password is a six-digit number consisting of (0-9).

(6) There should be at most five telephone numbers, three e-mail addresses and five emergency alarm numbers for receiving alarms.

(7) When there are multiple settings in each setting item, they must be separated by separators (for example, multiple mailboxes and multiple mobile phone numbers must be separated by separators).

(8) The set email address can only be English letters, numbers or underscores. When there are other settings after the mail settings, the last mail address must end with a separator; You can set up up to three mailboxes, and the current mailbox setting will overwrite the previous mailbox setting. When resetting multiple email addresses, several email addresses must be listed together for resetting.