What are the responsibilities of safety managers in construction enterprises?

Establish and improve the post safety responsibility system; Establish and implement the responsibility system for production safety at all levels and positions, such as project manager, builder, safety officer, team leader and employee. A, the project intends to post responsibility system for production safety 1 (project manager post responsibility system for production safety 1) must conscientiously implement the "Building Law" and related construction engineering safety regulations, adhere to the policy of "safety first, prevention first", and organize the implementation of various safety rules and regulations of the group company. Accept the supervision, inspection and review of the government security department and the superior competent department. 2) Be responsible for the safety objectives and labor protection of this project, and be the first person responsible for production safety. Supervise the safety functional departments to regularly check the implementation of safety operation procedures for each type of work, and strictly implement the requirements of "Safety Inspection Standard for Building Construction" (JGJ59-99) and "Technical Specification for Safety of Temporary Electricity Use in Construction Site" (JGJ46-2005). According to the characteristics of the project, organize the formulation of production management measures and check the implementation. 3) According to the engineering practice, organize the preparation of corresponding construction organization design and safety technical measures, and be responsible for their implementation. Review the pertinence, scientificity and feasibility of safety measures in construction organization design in detail. 4) Organize to formulate the safety management objectives of the project, strictly implement the safety reward and punishment regulations of the group company, and require all functional departments to implement the safety objectives and various management measures determined by the construction organization design. 5) Be responsible for the civilized construction of the project, and pay special attention to the sanitary management of the canteen, dormitory and toilet on the site. 6) Supervise the safety functional departments to do a good job in safety education and technical training for construction personnel, improve the safety awareness and self-protection ability of operators, and prevent all kinds of accidents. 7) Supervise the quality of labor protection articles and protective articles purchased by the materials department to prevent and put an end to counterfeit and shoddy products from flowing into the construction site. 8) Attend the important safety production meeting held by the owner. Organize relevant personnel to carry out weekly regular safety inspection, find all kinds of hidden dangers on the construction site in time, urge rectification within a time limit, and ensure the smooth progress of safety construction. Hold regular safety production meetings, summarize the safety production situation and arrange safety production tasks. 9) Go deep into the construction site to check the safety production situation, and take timely measures to solve and deal with the problems found. Support the work of safety supervisor. 10) Correctly treat the relationship between production and safety, do not command in violation of regulations, and urge all production teams to carry out safety activities. 1 1) In case of an industrial accident, immediately organize rescue, report it quickly, protect the site and participate in accident investigation and handling. 2. Deputy Project Manager's post responsibility system for production safety 1) According to the project safety assurance plan, organize relevant management personnel to formulate targeted safety technical measures, and pay attention to supervision and inspection at any time. Formulate the responsibility system for project managers and supervise their implementation. 2) Responsible for organizing relevant personnel to inspect and accept the safety protection facilities on the construction site. Regularly organize managers to learn safety operation procedures and safety rules and regulations. Be responsible for controlling hidden dangers of accidents and organizing the implementation of corrective and preventive measures. 3) Participate in the planning and review of the safety system, coordinate major issues in the operation of the safety assurance system, and organize safety production work meetings. 4) Implement standardization of site management, assist superior departments in safety inspection and supervision of engineering projects, and urge project managers to fill in safety information in time. 5) Coordinate the major issues in the operation of the safety assurance system, organize a safety production work meeting, form meeting minutes and distribute them to relevant personnel. 6) Resolutely implement the "five simultaneities". While planning, arranging, inspecting, summarizing and commending production and management, do a good job in planning, arranging, inspecting, summarizing and commending safety production. It is necessary to put safety in production on the agenda. When there is a contradiction between safety and production schedule, we must first obey safety, eliminate all unsafe factors through planning and arrangement, and put them into practice. 7) Handle general industrial accidents and assist in handling major industrial accidents and mechanical accidents, and follow the principle of "four don't let go", that is, don't let go until the cause of the accident is found out; The person responsible for the accident has not been seriously dealt with; The majority of employees have no education; Preventive measures have not been implemented. And take effective corrective measures to prevent accidents from happening again. 8) Be responsible for examining and approving the procurement plan of materials, equipment and facilities required for safety facilities, and urge all relevant personnel to do a good job of incoming goods acceptance. 3. Project engineer's post responsibility system for safe production 1) shall prepare the construction organization design and optimize the construction operation scheme with large safety difficulty coefficient. Check the implementation, implementation and execution of construction organization design to ensure safety in production. 2) Organize the preparation of the corresponding safety assurance plan and internal audit, and urge the implementation after approval by the superior. 3) Determine the dangerous parts and processes, and organize safety technical demonstration for high-risk and professional projects. 4) Formulate safety operation procedures that must be supplemented due to the particularity of this project; Select or formulate targeted safety technical disclosure texts at various stages of construction. 5) Monitor the safety system elements that the Engineering Department is responsible for and implement improvement measures. 6) Participate in the major production safety inspection of the project department, participate in the investigation and analysis of major casualty accidents, and put forward opinions and improvement measures. 4. The post responsibility system for safety production of the project construction director is 1), which is directly responsible for the management of safety production. We must strictly implement the policy of "safety first, prevention first" and national and local laws and regulations. Take management responsibility for the safety production of this project. 2) Pay attention to production and safety. Safety is to ensure production. It is impossible to do a good job in production without safety guarantee. In any case, when there is a contradiction between production schedule and safety, production schedule must obey safety and support the work of safety supervisors. 3) Strictly examine and approve the safety requirements of construction organization design, construction scheme, construction measures and work instructions, and organize their implementation. 4) Organize a safety inspection every ten days. Organize a meeting to discuss and analyze the problems found, put forward solutions, and quickly arrange rectification within a time limit. 5) Approve the distribution and management of labor protection articles according to the Labor Protection Law and company regulations. 6) Arrange and implement the disclosure of safety production measures of various professional foremen and the daily safety production arrangements of each team, and check their implementation, and correct them in time when problems are found. 7) Often go deep into the site, and go deep into the team for safety inspection to help the team solve the safety problems that are not conducive to production. 5. Project technical director's post responsibility system for production safety 1) is responsible for the management of safety technical problems in construction and production. In strict accordance with national safety technical regulations, procedures and standards, technical documents such as construction organization design and construction technology are compiled, corresponding safety technical measures are put forward, and safety technical operation procedures are compiled. Define the technical measures for safety production, and examine and approve the construction plans, measures and work instructions prepared by various disciplines. 2) Organize the study of rules, norms and standards, especially the study of new standards. New technology, new technology, new equipment and new construction methods should formulate corresponding safety measures and safety operation procedures. Instruct all professional and technical personnel (foremen) to make written safety production technical disclosure. 3) Implement the labor protection and safety facilities measures of the company's infrastructure and technical transformation projects, and do a good job in the treatment of three wastes. 4) Conduct technical appraisal of safety facilities, and be responsible for research review and technical appraisal of safety technology research projects and rationalization proposal projects. 5) Participate in safety inspection, analyze the problems existing in safety production, put forward technical measures to solve the problems, and supervise their implementation. 6) Often go deep into the site, inspect the safety production situation according to the shift, and help solve the problems in time when found. 6. Post responsibility system for safety production of project safety personnel 1) Seriously implement the Construction Law and the laws, regulations and policies related to safety production of construction projects, and adhere to the policy of "safety first, prevention first". Resolutely implement the company's safety production management system. Responsible for supervising the safety production of this project. 2) Participate in safety construction organization design, put forward safety technical measures, and be responsible for inspection and implementation. 3) Participate in formulating the safety management objectives of the project, earnestly carry out daily safety management, and be the assistant of the project manager. 4) Be specifically responsible for the civilized construction management of the project, and pay special attention to the sanitary management of the construction site, canteen, dormitory and toilet. Use a variety of forms to carry out "safe production" publicity and education activities. The concept of "safe production, everyone's responsibility" runs through the deep thoughts of every employee and is put into action. 5) Do a good job in secondary safety education and special type of work training for construction personnel, and improve the safety management ledger. Responsible for organizing the study and training of new workers, assigned students and re-employed laid-off workers on safety technical regulations and norms of this type of work, and requiring them to pass the examination. Before entering the construction site, the "three-level" safety education should be carried out and recorded on the card. Special types of work require certificates. Be responsible for contacting and training special types of work that have expired without a license, and only after obtaining the qualification certificate can they take up their posts. 6) Carefully check the implementation of operating procedures for each type of work on the construction site and give feedback to the project manager in time. Supervise the personnel entering the construction site at any time, use labor protection articles correctly, guide and urge employees to take good care of labor protection articles. Casual damage to labor protection articles shall be compensated at a discount. 7) Do a good job in safety technical disclosure of divisions and disciplines. Organize teams and groups to carry out safety activities and provide safety technical consultation. 8) Assist the project leader to organize regular safety inspections, deal with hidden dangers on the construction site in time, and issue a rectification notice within a time limit. Record the inspection in detail. To find out the hidden dangers of accidents, sort out written materials and send them to each team, and personally urge the rectification. 9) Go deep into the construction site for safety patrol every day, paying special attention to important parts such as places where there are many crossover operations and aerial work, and places where electricity is used for construction. When problems are found, they shall be ordered to rectify in time. 10) is responsible for the inspection and acceptance of electrical equipment installed on the construction site and construction power lines, and shall not be used without acceptance. In case of emergency, Party A has the right to take decisive measures to stop work and evacuate the dangerous site, as follows: order to cancel the order of illegal command. Those who disobey management and operate illegally will be severely punished according to the company's rules and regulations. 1 1) Participate in the safety activities of superior companies and various trainings of government departments, and be responsible for contacting and organizing local safety inspection and supervision stations and safety authorities to conduct on-site inspections. Organize their questions into written materials and distribute them to the team for rectification. 12) do a good job in the functional work and internal safety audit of the elements of the project department's safety production assurance system. Be responsible for the collection and arrangement of all information about the safety management of this project. 13) Check the quality of labor protection articles and protective articles, and feed back the use information. 14) has the right to stop illegal operations, and has the right to resist and appeal against illegal command behavior. 15) do a good job in holiday safety education and post change education for each type of work, and put it on record. 16) to participate in accident investigation and handling. 7. Post Responsibility System for Safety Production of Project Materials Personnel 1) All labor protection articles and safety protection articles must be purchased from qualified manufacturers and designated outlets recognized by relevant departments. 2) The qualified records and warranty of labor protection articles and safety production protection articles shall be submitted to the safety documenter for filing for future reference. 3) The materials of labor protection articles and safety facilities required for construction should be included in the plan and supplied in time. 4) Always contact the safety officer and listen to the feedback from the construction personnel on the purchased labor supplies and safety protection supplies. 5) Attend safety meetings and actively put forward reasonable suggestions. 6) Refuse all "three treasures" and electrical appliances that do not meet the requirements to flow into the construction site. 8. The project controller is responsible for the post responsibility system for production safety 1), and is responsible for the acceptance and daily maintenance management of mechanical equipment on the construction site before use. 2) Responsible for the supervision, acceptance and daily maintenance management of the installation and disassembly process of tower cranes, construction elevators, derricks and other large and medium-sized mechanical equipment on the construction site. 3) Be responsible for the supervision, inspection and management of lifting operation on the construction site. 4) Responsible for the acceptance of electrical equipment on the construction site and the management of safe electricity use at ordinary times. 5) Be responsible for the safety education and management of mechanical equipment operators on the construction site. 6) Be responsible for recording the traceability of machinery used in the construction site. 9, project engineer safety production post responsibility system 1) organize construction personnel to carry out training and certification work, and do a good job in education and training of the project department. 2) Conduct safety laws and regulations, civilized construction system and legal education for the construction personnel entering the site. 3) Record the entry and exit of labor force in the construction process and conduct dynamic management. 4) List the special funds of the safety production guarantee fund, supervise its implementation, and put forward the year-end final accounts. 5) Be responsible for all kinds of safety education and training, regularly publish blackboard newspapers and post safety slogans. Responsible for the specific work of subcontractors, and implement safety education and training for subcontractors. 6) Do a good job in fire safety, dormitory management and civilized health promotion. 7) Manage electricity safety and fire control in living quarters and electricity consumption in dormitories. It is forbidden to install sockets, connect wires and cook food without authorization. Cooling in summer and installing electric fans must be carried out in accordance with relevant regulations. 10, post responsibility system for safety production of project construction personnel 1) Abide by the National Building Law and laws and regulations on safety production of construction projects, adhere to the policy of "safety first, prevention first", and conscientiously implement various safety production rules and regulations of the company. 2) Seriously implement the project construction organization design and safety technical measures, and carry out the construction in strict accordance with the drawings. 3) Participate in the formulation of project safety management objectives, and cooperate with safety personnel to do daily safety management. 4) Pay attention to the civilized construction of the project, especially the sanitary management of the construction site, canteen, dormitory and toilet. 5) Arrange the construction plan reasonably, inspect the site, check the implementation of safety operation procedures, and have the right to stop illegal operations until the rectification is stopped. 6) Conscientiously implement various safety protection facilities to ensure that the safety protection facilities of machinery, electricity, racks and holes are in good condition. 7) according to the division, disciplines to do a good job of safety technical disclosure of each type of work. 8) Have the right to refuse the production instruction of unscientific, unsafe and uncivilized construction. 9) Participate in various safety production inspections. 1 1, Project Documentary Job Responsibility System for Safety in Production 1) Do a good job of on-site safety management ledger according to Construction Safety Inspection Standard (JGJ59-99) and Management Data of Construction Site Safety Production Assurance System. 2) Collect and file all kinds of safety agreements, contracts, construction organization design, safety technical measures, safety technical disclosure, safety education, safety training and other materials in time. 3) Timely collect the purchased labor protection articles and the certificates, certificates, licenses, warranty documents and other materials, and organize the filing. 4) often go deep into the construction site to understand the actual requirements of the project progress and safety facilities, and make records of the whole process to be correct. 5) often in conjunction with the supervision, design, construction units, and contact the safety officer, the builder and the material engineer of the project engineering department to collect and process relevant information and written materials in time. 6) Technical data, safety data, etc. , all the systems are bound into volumes and put on record for acceptance. 12, professional engineer (foreman) post responsibility system for safety in production 1) Seriously implement the laws, regulations, principles and policies for safety in production, take the lead in implementing the company's various rules and regulations, and be responsible for the "safety in production" of the production team under its jurisdiction. 2) The construction scheme, technical measures and work instructions must be targeted and operable when they are disclosed to the operation team. 3) According to each construction stage and combined with the construction object, organize shift workers to learn safety technology operating procedures and educate workers to observe the rules and discipline. 4) Often go deep into the team for construction inspection, and take timely measures to correct unsafe hidden dangers. Often urge the monitor to check the implementation of safety measures. Those who refuse to obey orders and accept management should be severely punished or replaced. 5) Participate in the safety inspection organized by the Project Department. Check and handle the potential safety hazards detected by the teams and groups under their jurisdiction. Help the team to take measures to correct existing problems. 13, team leader's post responsibility system for production safety 1) Team leaders should conscientiously implement the policy of "safety first, prevention first", set an example, and educate team members about the great significance of "everyone is responsible for production safety". Seriously implement the safety production rules and regulations promulgated by the company and the project department. Organize the employees of this team to learn safety rules and regulations, and check the implementation. Under any circumstances, it is not allowed to act recklessly in violation of regulations, and it is not allowed to use machinery, electricity, shelves and other equipment without authorization. 2) The monitor should learn and be familiar with the background requirements of safety technology such as the construction scheme, technical measures and work instructions issued by the project department to the team, strictly implement the safety operation procedures in combination with the specific conditions of team construction, and take further measures to ensure construction safety. 3) As a monitor, the monitor is responsible for the safety production of the class. Therefore, the monitor should always consider the life safety of the whole class, and make targeted safety disclosure when making production arrangements before going to work; Check the safety situation during work. If unsafe doubts are found, take timely measures to correct them, and conduct safety inspections before work. 4) Listen to the guidance of the full-time safety officer, accept improvement measures, educate the whole group of employees to stick to their posts, strictly implement the rules and regulations of production safety, and do a good job of handover and self-inspection after work. The squad leader should conscientiously implement the "rectification opinions on potential safety hazards" issued by the project department, maintain the "seriousness" of safety law enforcement, and never allow perfunctory things. But have the right to refuse illegal command. 5) The monitor should be strict with himself, enforce the law by example, strengthen the internal management of the team, organize safety team activities, hold a safety production meeting before class, and rationally allocate production tasks according to the working environment and employees' ideological and physical conditions. Severe criticism and punishment must be strictly required for individual employees who do not obey the management, and employees who refuse to correct them have the right to ask the project manager to dismiss them. 6) Before going to work, conduct safety inspection on machines and tools, equipment, protective equipment and working environment, take corrective measures immediately when problems are found, and eliminate hidden dangers in time. 7) Support the work of the safety officer on duty, adopt the correct opinions of the safety officer in time, and mobilize the whole group of employees to do a good job in safety production. 8) When an industrial accident occurs, immediately organize rescue, report in time and protect the site. 14, post responsibility system for workers' safety in production 1) Keep in mind that "everyone is responsible for safety in production", establish the idea of "safety first, prevention first", actively participate in safety competitions and activities, and receive safety education. Consciously abide by labor discipline and safety production system, do not operate in violation of regulations, and have the right to refuse illegal orders. 2) Seriously study and master the safety operation procedures, safety technical standards and relevant safety knowledge of this type of work, strive to improve safety technology, and consciously abide by various systems of safety production. Listen to the guidance of the safety officer to avoid illegal operation. Master the operation process requirements and follow the safety technical disclosure requirements, and be responsible not only for your own safety, but also for the negligence of causing harm to others. 3) Use labor protection articles and safety protection devices correctly, take good care of safety signs, obey distribution, stick to their posts, do not start others to operate mechanical and electrical equipment casually, do not carry out special operations without a license, and strictly abide by post responsibility system and safety operation procedures. Pay attention to the tools and equipment of the shift, check the working environment and tools, materials and mechanical and electrical equipment used at any time, do a good job in civilized construction and maintenance of various tools, and handle and report hidden dangers in time. It is forbidden to use electric tools to work in spite of illness. 4) Participate in safety activities, put forward reasonable suggestions, improve safety management and eliminate hidden dangers of accidents. 5) When an industrial accident occurs, organize rescue in time and report to the superior department. 6) Carry forward the spirit of unity and friendship, help each other, supervise each other, and abide by safety rules and regulations. New workers should actively impart knowledge about safety in production, maintain all safety facilities and use them correctly, and must not dismantle or change them.