None of the eight standards for acceptance of decoration construction can be less.

To decorate a house, we should learn the construction technology, and pay attention to the eight acceptance criteria in the decoration construction, so as to make our house decoration more perfect.

1. First of all, pay attention to the acceptance criteria of water supply and drainage pipeline installation: the quality of pipelines and fittings should meet the current standards; Valve installation should be correct,

The switch should be flexible; After the water pressure test, all pipes, valves and joints shall be free of water seepage and leakage. Drainage should be smooth, without leakage, backflow and water accumulation, and high-grade water fittings should be free of pinch marks and scratches. 2. Acceptance criteria for electrical engineering construction: the leakage switch is installed correctly and used normally; Installation and fixation of electrical devices and equipment shall be firm and stable; Electrical power-on test, lighting test of lamps and lanterns, and good control performance of lamps and lanterns; Switches, sockets, junction boxes and other devices are in good appearance, the insulation devices are free from cracks, and the installation is firm and upright, and the installation method conforms to the regulations; The deviation of switch and socket junction box installed in parallel, and the clearance around the plate and box of concealed switch, socket and junction box conform to the regulations; The weak current system has complete functions and authority, meets the use requirements, and the electrical appliances are installed firmly and correctly.

3. Acceptance criteria for suspended ceiling construction: the varieties, specifications, colors, basic structures and fixing methods of materials used for suspended ceiling construction shall meet the requirements of relevant design specifications; Cover panel and keel should be closely connected.

The surface should be smooth, free from pollution, cracks, lack of edges and corners, hammer damage and other defects, the joints should be uniform, the pasted cover panel should not be delaminated, and the plywood should not be planed; Shelved cover plates shall be free from leakage, penetration and warping. 4. Acceptance criteria for pasting project construction: the pasting project can be accepted only after it is completed and dried; When accepting, check whether the varieties, colors and patterns of materials meet the design requirements; Wallpaper and wall cloth must be pasted firmly, with the same surface color, without bubbles, hollows, cracks, wrinkles and stains, and without glue marks when squint; Smooth surface, no ripple, wallpaper, wall cloth, hanging mirror line, top corner line, sandwich panel, skirting board, sandwich panel and curtain hanging box are next to each other, with a distance of 1.5m, and there can be no obvious gap by visual inspection; Each mosaic is horizontal and vertical, and the patterns and patterns at the mosaic are consistent.

Do not leave seams or overlap; Yin and Yang angles are vertical and angular, with smooth overlapping of Yin and Yang angles and seamless Yang angles; Wallpaper, wall cloth edge straight and tidy, can not have paper wool, flying thorn; There shall be no leakage, subsidy and stratification. 5. Acceptance standard of ornamental design project construction: the ornamental design project can be accepted only after it is completed and dried; Check whether the varieties, specifications and patterns of ornamental design meet the design requirements when accepting ornamental design works; The ornamental design should be installed firmly, and its quality requirements and allowable deviation should meet the following requirements: the horizontal and vertical allowable deviation of strip ornamental design should not be greater than 3 mm; The allowable deviation of individual ornamental design position shall not be greater than 65438±00mm；; The surface of ornamental design should be smooth, with clear patterns and tight joints, and there should be no defects such as cracks, warpage and lack of edges and corners; The decorative surface should be smooth, with clear patterns and no cracks.

6. Acceptance standard of plate surface construction quality: the material and pattern meet the requirements of residents, and the product quality meets the technical requirements of national standards; The shop is firmly laid and not loose.

The ground leveling height difference is not more than 0.5 mm; The paving pattern is clear, without stains and pulp marks; Seam straight, pull through seam inspection, deviation is not more than 2 mm; The joint width is not more than1.0mm; The joint height difference between blocks is not more than 0.5 mm. 7. Acceptance criteria for wood floor installation and construction: materials should meet the requirements of residents and current product standards; Floor installation (bonding) should be firm, silent and free from looseness; The surface of the wooden floor should be planed and polished, without gouging marks, gouging residues and burrs, and the pattern (wood grain) of the painted floor should be clear; Joints of parquet floor should be aligned, with the same gap width, clean surface and no glue overflow; The skirting board is closely connected with the floor; The skirting board has a straight upper edge, and the total height difference should not be greater than 3 mm, and there is no seam close to the wall.

8. Acceptance standard of plastic surface construction quality: materials, colors and paving should meet the requirements of residents; The surface shall be flat, smooth and wrinkle-free, and shall not be warped or blistered; Uniform color, tight seam and straight edge,

Degumming place shall not be greater than 20mm, and the interval shall not be less than 500mm; The joint with the pipeline should be tight, firm and smooth; The skirting board is closely connected with the plastic board, the upper edge of skirting board is straight, the overall height difference is not more than 3 mm, and there is no seam close to the wall. The above is the introduction of "8 standards for acceptance of decoration construction, none of which can be less". I believe you will have a simple understanding of this after reading it. If necessary, you can continue to pay attention to the 1 home network for more information.