Job Recruitment Website - Property management - How to Zero Ford Transit Maintenance Lights

How to Zero Ford Transit Maintenance Lights

1, turn on the ignition key in the 2nd position. Hold down the small mileage reset button and don't let go. Turn the key into the car until the instrument light comes on, then let go and the maintenance light goes out. There is a button on the dashboard to adjust the mileage. Press and hold this button for 2-3 seconds when idling.

2. Press the brake pedal and accelerator pedal at the same time and wait for the maintenance light to flash (about 15 seconds).

3. Loosen the brake pedal and accelerator pedal.

Extended data

1. At present, the vehicle driving computer has a maintenance mileage prompt. If there is no maintenance mileage, the maintenance light will be on. After the maintenance, the service station will help you reset the maintenance light to zero, record the mileage, and remind you at the next maintenance mileage. If you don't go to the service station, you can also set the maintenance light to zero and follow the instructions. Maintenance mileage cannot be recorded without zeroing.

There is a maintenance light on the dashboard of the car. When the mileage of the odometer reaches 9600- 12000km, turn on the ignition switch and the maintenance light will be on for 2s. However, when the vehicle exceeds 12000km, the owner still fails to maintain it, and the maintenance light will keep flashing to remind the owner to maintain it in time. Before the car is not maintained, don't go to zero because the maintenance light is always on, otherwise the accumulated maintenance mileage of the odometer will be inaccurate.

Baidu encyclopedia-maintenance lamp zero