What is the general degree of decoration works before delivery of blank houses? Do you want to do plastering, doors and windows, ceilings, finishes and so on? How long does it take to decorate?

The acceptance of blank houses is a link that many owners ignore. The acceptance of blank houses is very important. Never ignore the simple and necessary acceptance of the whole house because you are too happy to get the key to the new house or other reasons, because the acceptance of the blank house directly affects whether your subsequent decoration can be carried out smoothly and completed with high quality.

1. Doors and windows: Doors are the most easily forgotten places. After the owner happily opens the door with the key, what he cares most is to see what the house looks like, and the appearance and appearance of the door are left behind. This process is absolutely undesirable. Security doors are installed in all the houses now. After opening the door, you should observe it carefully, touch the surface of the door with your hands to see if it is flat, scratched and hit, and then visually check whether the door frame is straight, because this will directly affect your future use in real life. You should try the lock back and forth to see if it can open and close properly. If you encounter problems, you should report them to the property in time and replace them.

Now, plastic steel windows and insulating glass are used in houses. Check the glass and window frame of each room for sundries, water marks, scratches and moisture during acceptance. Whether the window frame is straight, whether the window switch is normal, whether it can reach 90 degrees when opening the window, and then touch whether the waterproof strip is attached to the window by hand. By the way, it depends on whether the screen window of each window is installed.

2. Walls and floors: In the acceptance of rough houses, walls and floors are the most important places with the largest area. We need to check whether the walls and floors of all rooms are flat and whether there are vacancies in the walls of the kitchen and bathroom. If the wall is uneven, it will bring a lot of trouble to the later decoration, and the uneven ground will also affect the later bricklaying or floor laying. If there are hollows on the walls of the bathroom and kitchen, it is easy to fall off after tiling. In order to avoid and find these problems as soon as possible, we can use some daily and easy-to-operate soil methods to test, find a long straight board and stick it on the wall to see if it fits the wall. If the error of 1-2 mm is within the national standard, if the error is large, please ask the property manager to find a worker to erect this wall again. We can also take a book and lean against one of the 90-degree right-angled corners to see if it is perpendicular to the 90-degree angle of Yin and Yang. To see if there is an empty drum on the wall, you can test it with a small hammer and judge whether there is an empty drum on the wall by the sound made when knocking.

3. Electricity: When checking the house, check whether there is electricity in each room and whether there is a simple light bulb in each room to see if it is normal. Don't forget the socket in every room. Now there are simple electric probes on the market, which are not very expensive. We can use electric probes to test whether each socket has electricity. If there is no electric probe, you can use the indigenous method, and you can test it with a mobile phone charger or a hair dryer.

4, water: blank rooms, bathrooms, kitchens have good water pipes, but most of them do not have faucets. We can take a bucket of water and pour it into the pipe separately to see if the water is happy or blocked. If we hear a plop, it means that the water is happy. The floor of the bathroom should be waterproof, but it is impossible to do a waterproof test because of the conditions during the house inspection, so we should let the decoration workers do a waterproof test before the decoration and see if there is any water leakage after 24 hours.

5. Ventilation system: Ventilation system is a big problem that is easily overlooked in house inspection. Flues and exhaust pipes are places that are easy to leave hidden dangers for future daily life.