The house is about to be renovated by a contractor. What should I pay attention to?

Turn off the rule 1 Check all outlets. Friends who don't have an electric pen can bring a charger and a three-phase connector. The charger can check the two-phase socket and the plug of the three-phase connector can check the three-phase socket. Check all the windows and glass: glass can't be scarred. Everything we buy is a commodity, so we should check it carefully, or we will lose money. Don't think that it doesn't matter if there is a small scar on such a big piece of glass. Think about it. If you are buying a mirror, you definitely don't want a mirror with a scar. Check the window screening. Many screens have broken screens or big scratches. Check whether the window touches the wall when it is opened. It is easy to destroy this wall. 3 Check the telephone line and broadband interface. The quality of Tianlun's telephone line and broadband panel depends on whether it is fixed firmly! 4. Check whether the radiator and balcony guardrail are firm. 5. Check each light and switch. 6. Check each faucet. 7. When closing the house, check the original "Completion Record Acceptance Sheet" and "Housing Area Measurement Sheet", otherwise it will be too late to raise the area issue once you pick up the key. In judicial practice, if no objection is raised when the house is closed, it is regarded as the fact that the purchaser gives up the right of area dispute. 8. Pay attention to the window hinges and water pipes when closing the house. There are many questions. Suggested transaction date: the general real estate agent informed us that the small owner would hand over the house in advance. It is recommended not to close the house on the first day and the second day, because there will be many people who come to close the house at the same time on those two days, and the people who accompany the house inspection will not have much time to accompany you to see the house carefully. It is best to do this on the third or fourth day. Tools to be brought: 1) 1 plastic washbasin-used to check sewer pipes; 2) 1 small hammer-used to check whether the walls and floors of the house are empty; 3) 1 feeler gauge-used to measure the crack width; 4)15m tape measure-used to measure the clear height of the house. 1 multimeter-used for testing the fluency of various high-voltage sockets and weak current categories 6) 1 calculator-used for calculating data 7) 1 fountain pen-used for signing 8) 1 broom-used for cleaning indoor sanitation 9) 1 stool and some newspapers and magazines. Generally, the normal acceptance of the house lasts 2-3 hours. It is recommended to go at 8: 30 in the morning or 2: 30 in the afternoon. Generally, the normal acceptance of the house lasts 2-3 hours. It is recommended to go at 8: 30 in the morning or 2: 30 in the afternoon. Process 1) Go to the property management department to check the information, and there are the following documents to check: a, house quality guarantee-take-out B, house instruction-take-out C, completion acceptance record form D, area measurement form E, pipeline distribution as-built drawing (water, strong electricity, weak electricity, structure)-2) Check the area, contract and price. Confirm whether the attached drawings of the sales contract are consistent with the actual situation, whether the structure is the same as the original design, whether the house area has been measured by the real estate department and whether there is any difference with the area agreed in the contract. (check the house sales contract first to see what the error is, usually 3%. If the error is less than 3%, it will be ignored and the excess will be treated. It is suggested that the contract has an error of 2%, but it is best not to exceed 5%. ) The contract signed by both parties shall prevail. Generally, this time varies from person to person, and it takes 30-40 minutes to accept the house. After reading those materials, you can basically check and accept the house. Consultant Kevin suggested: don't pay some property fees and related expenses for the time being. At this time, the property will urge you to deliver, you can communicate with them, and then pay after acceptance. To get the key from the property office, there should be a floor key, an access key, a mailbox key and a water meter. Then you can go to see the house with the property manager. (Remember to bring those tools) 1) Check the quality of the house in detail, including whether there are cracks in doors, windows and balconies; Tip: Because the new house is closed for a long time, there will be some dust and construction waste on the door and window tracks. Don't be impulsive. Pull doors and windows with brute force. When you feel blocked, take a closer look and you can see clearly with a broom. 2) Check the flatness of the wall surface for water seepage and cracks. Tip: especially check some walls, especially some gables and kitchen countertops for water marks. 3) Check the ground carefully, and check whether there is shell cracking on the ground. Tip: If there is an empty drum, you must instruct the accompanying property personnel to repair it as soon as possible, otherwise it will easily wear out the floor in the decoration and hinder the neighborhood relationship. The above 2-3 items can be used as tools: small hammer and feeler gauge. 4) Water, electricity and coal are unblocked and can be used normally. Turn on the tap to check for leaks and blockages, so as to make the water flow as big and urgent as possible. First look at the water pressure. Second, try the drainage speed. Generally, a new house will be equipped with a simple faucet for the owner. Use a multimeter to measure whether each strong and weak current is unblocked. Tip: Close the brakes and check whether each brake completely controls each branch line. 5) Acceptance and production. First, fill the basin with water, and then pour the water into all the sewage places, that is, basin water, bathtub water, bathroom water, kitchen sanitation and balcony floor drain. Basically, each drain should contain about two pots of water, with gurgling sound, and there should be no water on the surface. Tip: after these things are done, make sure there are no problems. Cover these protruding drains (such as washbasin drain, bathtub drain and toilet drain) with plastic bags as soon as possible, and then tie them firmly. Drains such as floor drains need to be plugged firmly (remember to leave a place where they can be pulled off). 6) Acceptance of ground launch. Toilet drainage, just shallow (about 2cm high). Then I made an appointment with the owner downstairs to check the smallpox in his toilet 24 hours later. Tip: after all the water is used up, turn on the water meter again, see the number of the water meter clearly and record it. At the same time, you should record the number of the water meter. 7) Check the facilities and equipment specified in the sales contract, and check whether the facilities and equipment specified in the sales contract are omitted and whether the brand and quantity are consistent; Tip: Usually, there should be no major problems in this respect, but it really needs careful inspection. 8) Measure the height of the building, and sample the data source, location and specific data with a 5m tape measure. It is best to write down the water meter, meter number, building height, toilet pit distance, bathtub length and width, shower room size and ceiling height in your notebook, and also write down some data and problems of house acceptance on the paper provided by the property management company. Finally, after checking these jobs, if there is no problem, then pay the money; If there is a problem, it is necessary to determine the solution and date with the property management personnel to see if the solution will affect the house collection. If there is, it is necessary to negotiate.