Facilities and equipment management plan?

The management scheme of facilities and equipment is very important. Only when it is well managed can it play its due role in use, and solving the actual needs is the most critical. Zhong Da Consulting will explain the facilities and equipment management plan for you.

(a), the classification of equipment and facilities according to the functions, uses, importance and other reasons of all kinds of equipment and facilities.

Classified management, divided into three categories: a, b and C.

For example:

Class A: monitoring system equipment, distribution room cabinets, household pumps and fire pumps.

Fire alarm system, elevator and others.

Class B: exhaust equipment, water tank (pool), fire extinguishing equipment, sewage pump, etc.

Class C: house lighting facilities, indoor and outdoor sockets, various lamps, faucets,

Drainage facilities, roads and others.

(2) Operation and management of equipment

1. For Class A equipment, according to the operation requirements of various facilities and equipment and the property service plan, the property electrician will conduct patrol management.

2, property electrician personnel must undergo professional training, familiar with the performance, characteristics and operating procedures of management personnel, after passing the examination, can mount guard operation.

3. The property electrician shall operate and inspect the equipment according to the post responsibilities and operating procedures.

Keep operation records.

4. According to the relevant system of equipment operation management, the property electrician shall inspect and patrol the equipment operation every day, check the equipment operation status, pay attention to the safety, rationality and economy of equipment operation, check the operation and maintenance records, sign the relevant records after inspection, and correct the problems in time when found. The property manager should fill in a detailed report on the equipment problems found and supervise the rectification.

(iii) Maintenance of equipment and facilities

1. The property electrician is responsible for the maintenance of the equipment and facilities under his jurisdiction, and the equipment supervisor cooperates with the property supervisor to organize the maintenance of this project.

2. Equipment and facilities maintenance is divided into three levels: daily maintenance, regular maintenance and annual inspection maintenance.

(1) Daily maintenance is mainly patrol inspection and cleaning; The main work of regular maintenance is to check the performance status and plan the performance repair; Annual inspection and maintenance is mainly to comprehensively adjust the equipment.

(2) The electrician on duty is generally responsible for the operation of the equipment, the equipment supervisor is responsible for regular maintenance, the electrician on duty cooperates, and some equipment is outsourced to professional companies.

(3) Maintenance items shall be specified for all kinds of equipment. The equipment supervisor shall make annual and monthly maintenance plans according to the equipment management regulations and combined with the specific technical conditions of the equipment, and implement them after being approved by the company leaders.

(4) The annual inspection and maintenance of the equipment shall be carried out by the entrusted annual inspection unit. Report to the company in writing after maintenance.

(4), equipment and facilities maintenance

1, the maintenance of equipment and facilities can be divided into two categories: planned maintenance and fault maintenance.

(1) Planned maintenance refers to the pre-maintenance and repair of deteriorated and defective parts before any problems occur in equipment and facilities;

(2) Fault maintenance refers to the targeted maintenance of the failed and damaged parts after the equipment fails.

2. Equipment and facilities maintenance adopts two forms: entrusted maintenance and scheduled maintenance.

(1) Entrusted maintenance is mainly used for fault maintenance. The property management center is equipped with the central control room on duty 24 hours a day, with the telephone number of the company group, which can accept the maintenance declaration and fault report of the owner and company management at any time, and quickly repair it within the specified time after receiving the report.

(2) Scheduling maintenance is mainly used for planned maintenance, new installation and transformation of sporadic and small equipment. The equipment supervisor shall fill in the dispatch list according to the equipment regular maintenance plan, the analysis and investigation results of the current equipment operation status and the requirements of the owner, and assign special personnel to complete the specific work. The processing and follow-up process of dispatch orders shall be carried out in accordance with the entrusted maintenance regulations.

(5), equipment failure and accident

1. Anyone is forced to stop running due to improper operating procedures, improper operation or abnormal damage to equipment. If it reaches a certain time or causes losses, it is called an equipment accident.

2. Losses and other circumstances that affect less than the severity of the accident are called failures.

3, no matter what kind of equipment failure and accident, the equipment director must immediately organize relevant departments to deal with it quickly. If it is a major event, it must be reported to the Equipment Management Department in time and reported to the company in writing for coordination and handling.

4, no matter what kind of equipment failure and accident, equipment management department, property manager, electrician must be detailed records, shall not be omitted or concealed.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd