How to implement the management of safety production inspectors?

What are the specific contents of the management measures implemented by the safety production inspector? Zhong Da Consulting will answer your questions below.

Chapter I General Provisions Article 1 In order to conscientiously implement the policy of "safety first, prevention first and comprehensive treatment", further improve and strengthen the supervision of production safety, strengthen anti-violation work, eliminate hidden dangers of accidents, promote standardization and standardization of production safety management, and realize "controllable, manageable and controllable" production safety, in order to implement the supervision of production safety management system of the project department, The implementation of safety production supervision system according to Article 2 of the Measures for the Implementation of Safety Production Supervision of Project Department aims to further strengthen safety responsibility, strengthen the implementation of various safety production management systems, strengthen safety management work such as safety production awareness and hidden dangers investigation and rectification, and achieve safety management objectives. Article 3 Leaders at all levels, safety supervision departments and inspectors should seriously investigate and deal with illegal command, illegal operation and violation of labor discipline (i.e. "three violations"), investigate and deal with violations with iron system, iron face and iron treatment (i.e. "three irons"), resolutely handle violations in accordance with the principle of "four don't let go" and adhere to the principle of combining safety education with punishment for violations. Chapter II Safety Supervision Organization Article 4 A safety production inspection team shall be established in accordance with these Measures. The safety inspector group shall supervise the project according to the national laws and regulations on safety production and the safety production management system of the project department. Article 5 The Project Department shall set up a two-level safety inspection team. The inspector team works under the overall leadership of the safety supervision department of the project department. The project ministerial inspector group is located in the safety production supervision and management department of the project department; The inspector team of the project department is composed of full-time personnel of the safety supervision department of the project department. Article 6 The members of the Inspector Group of the Project Department shall be familiar with the laws, regulations, policies and regulations related to production safety, have rich on-site work experience and the ability to analyze problems, love and respect their posts, adhere to principles, have a strong sense of responsibility, and be honest and dedicated. After passing the examination, it shall be recommended and issued by the safety supervision department of the project department. Special safety supervision activities should be carried out in a timely manner according to the actual needs of the safety production work of the project department and the requirements of the safety production supervision and management department of the project department. Article 7 The production safety inspection team of the project department shall conduct a systematic inspection and supervision on the key monitoring project department every quarter. Article 8 The safety inspector team shall be responsible for the first person in charge of safety and the safety supervisor of this project department, and accept the guidance of the safety supervision and management department in business. Chapter III Personnel of the Safety Inspector Group Article 9 The members of the Safety Inspector Group are composed of management personnel, safety management personnel and relevant professionals with on-site construction experience. Article 10 The head of the safety inspector of the project department shall be the deputy manager of the safety management project of the project department, and the deputy head shall be the head of the safety supervision department of the project department. Article 11 Basic requirements for members of the safety production inspector group: 1. More than ten years of on-site construction experience. 2. Familiar with safety production laws and regulations, the project department and the safety production management system of the project department, with rich on-site work experience and problem analysis ability, dedication, adherence to principles, strong sense of responsibility and integrity. 3. Participate in provincial and municipal (or project department) safety production management training and pass the examination. Participate in safety production training and re-education as required every year. 4. The safety production committee of the project department shall examine and confirm it, and hold relevant certificates. 5. The inspector of the project department is recommended by the project department and assessed by the office of the safety production committee of the project department. Chapter IV Methods of Safety Supervision Article 12 The safety inspector group shall formulate a safety supervision work plan and report it to the relevant leaders for approval before implementation. Article 13 To carry out safety production supervision, it is mainly based on the national laws and regulations on safety production and the safety production rules and regulations of this project department, urging the project to educate employees on safety awareness and train their operation skills, urging the project to investigate and rectify hidden dangers, and standardizing safety production management. Fourteenth inspectors to take on-site inspections, seminars, individual exchanges, access to information and other ways. Article 15 Inspector principle: 1. The principle of "justice, openness and fairness". Penalties for illegal operations must be based on facts and graded in strict accordance with the "Violation Scoring Standard". 2. The principle of "rules to follow, violators are prosecuted". All members of the working group should abide by the rules of safe work and follow these rules. Inspectors should stick to the principle so that violations will be prosecuted. 3. The principle of putting prevention first. Inspectors should know the weak links and key links of on-site safety production, take precautions and nip in the bud. 4. The principle of regularity. In order to ensure the effectiveness of on-site safety supervision, we must often go deep into the production site. 5. Key regulatory principles. Important and complex production sites should be monitored. 6. The principle of combining education with punishment. It is necessary to punish violators as well as provide necessary safety education and assistance to violators and relevant personnel. Chapter V Duties of the Inspection Team Article 16 The work of production safety supervision adheres to the principle of combining supervision with service, bears the supervision responsibility for the project production safety management, and helps the project to strengthen management and continuously improve. Seventeenth in the process of construction site supervision has the following duties and rights:

(1) Responsibility 1. Consult the safety production related information of the project under construction and verify the relevant situation; 2. Check the implementation of the special construction scheme for the safety of dangerous projects; 3. Supervise the performance of full-time safety production management personnel of the project; 4. Supervise the preparation and use of safety protection articles for operators; 5. Have the right to correct illegal acts or potential safety hazards found in safety production on the spot or make a decision; 6 facilities, equipment and equipment that do not meet the conditions for safe production have the right to make a decision on the spot. (2) Permission 1. Have the right to enter the production area, construction site, control room and dispatching room to check and understand the safety production situation. 2. Have the right to stop the "three violations". 3. Supervise, correct and punish "three violations". Those who do not listen to dissuasion have the right to order them to stop work and increase the punishment. 4. Have the right to extract and consult the relevant materials of the "three violations" operation site, and have the right to take photos, record and video. 5. The project departments and individuals who violate the "three violations" have the right to suggest informed criticism. 6. Individuals who have made significant contributions to anti-violation work have the right to put forward reward suggestions. Article 18 The inspection team of the project department must conduct a safety inspection on all projects under construction of the project department once a year, and the inspection times should be increased for newly started projects and small and medium-sized projects. Article 19 When carrying out safety supervision, while giving consideration to other safety management work, the following contents shall be mainly supervised and evaluated: 1. The implementation of the safety production documents and meeting spirit of the superior and the project department; 2. The performance of the first person responsible for production safety; 3. The establishment and implementation of safety production responsibility system, safety management rules and regulations and operating procedures; 4. The time, content and effect of safety education and training for employees (including subcontractors and temporary workers); 5. Identification and monitoring of major risk factors; 6. Investigation and rectification of potential safety accidents; 7. Formulation, approval and disclosure of special safety technical measures; 8. Safety management status of special equipment and large construction machinery; 9. Management of outsourcing team and temporary employees. Chapter VI Management of On-site Supervision and Inspection Article 20 When conducting on-site inspection, the safety inspector group shall make overall arrangements and pay attention to actual results. To carry out on-site inspection, an on-site inspection plan shall be drawn up in advance, and a notice of on-site inspection shall be issued. The on-site inspection plan shall include the inspection basis, inspection time, inspection objects and inspection items. On-site inspection notice shall include inspection basis, inspection schedule, inspection items, list of inspectors and matters that need coordination and assistance from the inspected project department. Twenty-first safety inspectors can directly conduct on-site inspection with the notice of on-site inspection. When conducting on-site inspection, a notice of on-site inspection shall be issued. The inspected project department and its personnel shall cooperate and assist the safety inspection team to conduct on-site inspection. Inspectors may, as required, ask the staff of the inspected project department to explain relevant matters. The person being questioned shall make an objective and true explanation to the inspectors, and shall not conceal or fabricate facts. The inspector shall record the inquiry. After the inquiry is over, the interviewee shall check the inquiry record on the spot and sign it. Article 22 When inspectors conduct on-site inspection, they find that the inspected project department has violated the relevant provisions of the state and the project department on safety production management, and shall be ordered to make corrections on the spot or within a time limit, and make detailed records, issue a rectification notice, which shall be signed by the inspectors and the person in charge of the inspected project department for confirmation. If ordered to make rectification within a time limit, the inspected project department shall submit a rectification report within a time limit. After the on-site inspection, the inspection team shall submit the on-site inspection report to the safety production committee of the project department. The on-site inspection report shall include the basic information, basic conclusions and the handling of related problems of the on-site inspection. The Office of the Safety Production Committee of the Project Department shall summarize the overall inspection and write a written report to the deputy project manager in charge. After the on-site inspection, the safety inspection team shall timely feedback the inspection results (inspection report) to the inspected project department; When necessary, the Office of the Safety Production Committee of the Project Department may notify the Project Department and the Project Department to conduct safety inspection. Twenty-third safety inspectors found violations in the on-site inspection, should be based on the "Interim Measures for the punishment of safety accidents and violations" to give corresponding economic penalties. Twenty-fourth inspectors should strictly enforce the law and be honest. Inspectors in any of the following circumstances, according to the seriousness of the case, give criticism and education or administrative sanctions; (a) in violation of the prescribed procedures for on-site inspection; (2) interfere with the normal production and business activities of the inspected project department; (three) using the inspection work to seek benefits for themselves, their relatives or others; (4) divulging business secrets and personal privacy known in the inspection; (five) other acts in violation of the provisions of the on-site inspection. Article 25 For the hidden dangers and management problems found in the inspection by the safety inspection team, the Notice of Requirements for Hidden Dangers Rectification shall be recorded and issued, requiring the inspected project department to specify the responsible person, measures and the time for completing the rectification. The inspected project department is required to give written feedback on the rectification, and the safety inspection team will check the rectification results. Article 26 After the inspection, the inspection team shall sort out the time, place, content, problems found, treatment opinions and results of the inspection into an inspection report, which shall be signed and approved by the person in charge of the inspected project as an important basis for the safety assessment of the project and full-time safety production management personnel at the end of the year. Article 27 The two-level inspection team shall regularly submit safety inspection reports to the project department, the project department leader or the competent leader, analyze the safety production situation, and strengthen contact and communication with the safety supervision department. Article 28 The inspector group shall timely report the inspector situation within the scope of this project department.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd