Which is more cost-effective to change tiles or cover iron sheets when the house leaks?

It is more cost-effective to re-tile the leaking house than to cover it with iron sheets.

1, the cost of replacing bricks in leaking houses is low, and some old bricks can still be used.

2, the house leaks and re-tiling is equivalent to changing new tiles, which takes a long time.

3. The house leaks and is covered with iron sheets. It is warmer indoors when it is hot.

The iron sheet will rust if the house leaks for a long time.

5. The cost of leaking roof iron sheet is higher.

Prevent cracks from leaking and do a good job of maintenance.

Cracks and water leakage are also one of the high-incidence problems. Maintenance will destroy the decoration and be more troublesome. Water leakage in the upper and lower floors often leads to disputes and contradictions between owners, tenants and property management companies, which must be properly handled.

Cause: The concrete temperature is not controlled.

When pouring concrete, the temperature is not well controlled, or it may be that your maintenance is not in place; The ratio and structure of steel bars and the load on the roof are too heavy; If the settlement joint is not completed according to the design and specification, the construction shall be carried out at the expansion joint and post-pouring belt.

Repair method: clean the concrete.

First, clean up the concrete with bad joints, and then you can repair it with higher grade concrete according to the requirements of construction specifications. High pressure grouting can also be considered to repair cracks.