Installation process of charging pile and related matters

1. Preparation before installation of charging pile 1. Determine the pile location: the terrain on the mountain is steep, so it is recommended to choose the pile location for charging pile installation;

2. Pile site preparation: To clean up the installation site of the charging pile, it is necessary to expand the width of the pile site to the installation requirements of the charging pile to ensure smooth installation;

3. Check the four-core cable supporting the charging pile: the label at the opening is clear, and there can be no damage, zipper or solder;

4. Determine the installation scheme: according to the specific installation environment, design the installation model on the groove multi-head molding machine;

5. Prepare to install related tools: electric tools, pipeline sealing devices, exhaust devices, etc.

Second, the charging pile installation

1. The ground pit-groove multi-head forming machine will carry out model design: according to the specific installation environment of the pile location, the installation model will be designed on the pit-groove multi-head forming machine to facilitate the installation of related electrical equipment in the hole;

2. Installation: Install the charging pile according to the design model, and test the electrical system of the charging pile after installation to ensure the stable installation of the charging pile;

3. After the installation, check the pipeline connection: after the installation, check whether the pipeline connection is firm, and correct any problems in time;

4. Installation completion: After the installation is completed, check the integrity and standardization of the charging pile installation and complete the charging pile installation.

Three. Matters needing attention in installation of charging pile

1. Safety protection measures must be taken before installation of charging piles to avoid safety accidents;

2. Charging piles should be correctly installed at designated locations, and downloading to markets and residential areas is prohibited;

3. After the installation is completed, ensure that the charging pile is installed stably, and the catenary equipment is grounded and electrocuted normally to ensure the safety of passengers;

4. The wiring pipes and fittings used shall be corrosion-resistant and installed to prevent external dust and water from entering;

5. When installing the charging pile, it is necessary to adopt heat dissipation technology to avoid potential safety hazards caused by excessive temperature.

Million car purchase subsidy