How to use the electricity meter without swiping the card?

The user takes the inductive IC card to the power supply department to pay the electricity fee, and the power supply department writes the purchase amount into the IC card with the electricity sales management machine. The user holds the IC card, brushes the contactless IC card in the induction area, and then the power can be turned on. After the power is turned on, Kolor leaves. When the remaining power of the meter is equal to the alarm power, turn off the power supply and give an alarm (or buzzer alarm). At this time, the user can return to normal by swiping the card in the induction area, and the power supply can be restored by swiping the card in the induction area. When the remaining power is zero, the power will be cut off automatically, and the user must pay the card again to buy electricity before resuming power use.

: 1. How to check the remaining power of plug-in meters?

1. Step by step reading

During the operation of the meter, the remaining power and total power consumption in the meter are displayed in turn every 30 seconds. (When the small indicator light in the upper left corner of the display is on, the total power consumption will be displayed; When the small indicator light in the lower left corner of the display lights up, the remaining power is displayed).

2. The total electricity consumption is displayed in two sections: the first section displays the figures of 100000, 1 000, 1000 and 100, and the second section displays the figures of 1 0 and decimal;

3. The remaining power is displayed in two parts: the first part displays thousands and hundreds, and then displays tens, units and decimal places.

4. Before purchasing electricity, the user must insert the IC card into the card holder at one time, so that the data in the table can be transmitted back to the computer database.

2. In daily life, people may forget to pay their electricity cards because they are busy, which leads to electricity meter arrears and power failure, which brings inconvenience to life. Today, I'd like to share with you a coup, which can help you use electricity temporarily when you are in arrears and have a power outage. In fact, the power supply company has taken into account the emergency mistakes when it is in urgent need of electricity due to arrears when designing electricity meters. All electric meters have overdraft capacity for emergency use in case of power failure. The overdraft amounts of meters in different regions and models are different, including 15 yuan and 30 yuan.

Overdraft mode: After the electricity is cut off due to arrears, the switch under the electric meter will trip automatically.

Method 1: After inserting the electric card into the card slot of the electric meter, find the "air switch" under the electric meter, commonly known as the "switch", turn on and off the air, and then pull out the card, and the overdraft is successful.

Method 2: If the electric card is lost or carried with you, you can replace the electric card with your ID card, insert the ID card into the card slot of the electricity meter, and close the "air switch" to overdraw the electricity.

Method 3: If there is an emergency at home, you can call the service hotline of the power supply company to truthfully report it, and the staff of the power supply company will make a temporary connection.

Matters needing attention

Owners, please pay in time after overdraft, so as not to affect the subsequent electricity consumption. Overoverdrawn electricity can only be used once.