Job Recruitment Website - Property management company - What should I pay attention to when measuring the house before renovation?

What should I pay attention to when measuring the house before renovation?

(1), prepare the measuring room tools.

When measuring houses, the basic tools are tape measure, pen and paper, and the length of tape measure is more than 5 meters. Other tools include cameras, drawing boards and laser measuring instruments.

The traditional tape measure room is troublesome to operate and has large measurement error. Nowadays, the tools for measuring rooms are more and more advanced, such as laser rangefinder, which is simple to operate, and can reflect the numerical value with a photo with high accuracy.

(2), drawing room drawings

If you don't carry a room plan, you need to draw a general plan structure on paper at the scene. Charts don't need to be too particular about size, as long as they can be marked with data.

(3) Implementation of measurement

Measuring a room is a trivial process. Judging from the action of measuring a room, it can be basically divided into measuring, watching, touching, taking pictures and asking.

The correct order of measuring rooms: Generally, measuring rooms starts from the entrance door, turns around, and then goes back to the other side of the entrance door to measure all the rooms in the house. If it is multi-storey, in order to avoid missing measurement, the measurement sequence should be one floor, and the order of rooms should be from left to right.

Length and height measurement method: when measuring the length and height of a specific room with a tape measure, the length should be measured close to the ground and the height should be measured close to the corner. There are no special circumstances, and the height of the story is basically determined. Find two places at random to measure the average story height.

Positioning methods such as doors and windows: all dimensions are segmented, just like geometry, and data are recorded at any time after measurement. First measure the length, width and height of the door itself, then measure the left and right spacing between the door and its wall, and then measure the spacing between the door and the ceiling.

(4), take pictures and keep the bottom file.

In order to have a better grasp of the whole space, it is good to take pictures when measuring the room, which is conducive to the accuracy of the later design.

(5) The designer and the owner exchange views.

When measuring the house, the designer should communicate with the owner, see the owner's idea of the house and the requirements for the use of functional areas, and preliminarily judge the feasibility of the owner's idea according to the site situation.