How to program electronic sawing materials in Jidong

Manual programming of the machine can be performed according to the following steps:

1. Open the control panel of Jidong cutting machine to ensure that the machine is in manual mode.

2. Find the programming function option on the control panel. There are usually "programs" or "programs" buttons or menus.

3. Click to enter the programming function interface.

4. In the programming interface, you can see some programming options and operation buttons, such as adding instructions, editing instructions and deleting instructions.

5. First, select the option to add instructions. There is usually an "Add" or "Add" button.

6. In the Add Instruction interface, you can set specific operation instructions, such as moving to a certain coordinate, cutting or drilling. According to the need, set the parameters of the instruction, such as moving distance and cutting depth.

7. After setting, click the Confirm or Save button to add the instruction to the program. You can continue to add other instructions and set them as needed. After programming, you can choose to save the program. Generally, there is an option of "Save" or "Save". After saving the program, you can choose to run it. Generally, there are two options: Run or Run.

8. The cutting machine will operate according to the instructions set in the program to complete the corresponding processing tasks.