Why do big brands of cabinets use solid wood particle boards as cabinets?

Many customers' cognition is that the better the wood is, and many merchants use this not necessarily correct cognition to fool, resulting in the market.

Strange phenomenon: The more miscellaneous brands, the more eco-boards, the more famous brands, and the less people make this thing.

At present, we mainly have these kinds of boards in the market:

Particleboard (particleboard, moisture-proof board), density board (medium density fiberboard), ecological board (joinery board, large core board), multilayer board (plywood), knuckle board, logs.

Moreover, we see that they are basically famous brands, cabinets generally use particle boards, and door panels may be made of various materials. So, why choose this way?

Mainly based on the following reasons:

1、

The deformation resistance and cracking resistance of particleboard are higher than those of other boards except MDF, the adhesion is higher than that of MDF and some eco-boards, and the moisture resistance is higher than that of MDF. Although the water resistance is lower than that of logs and multi-layer boards, and the strength is lower than that of multi-layer boards, knuckles and density boards, for the currently customized cabinets, they are all three-in-one fasteners, rather than on-site partition, so the physical properties of their defects can be ignored.

In terms of physical properties, particle board is the most suitable for customized products.

2、

From the perspective of environmental performance, we always enter a misunderstanding, which batten is bigger and which is environmentally friendly. This is a fundamental mistake. All boards are made of wood, regardless of size, and the formaldehyde content of wood itself is

About 0. 1 mg, the remaining formaldehyde is actually produced by the glue stuck to the board in the production process (including logs) and the quality of process control. Then,

What kind of bonding board or process is actually the key to determine the environmental protection of the board.

Now there are urea-formaldehyde glue, melamine glue and

mdi

Even glue.

mdi

There is no formaldehyde in the glue, so the formaldehyde content in the glue determines the environmental protection of the board, which has little to do with the type of the board and the size of the wood strips. Particleboard and density board are environmental protection industries encouraged by the state (environmental protection here means saving tree resources), and also furniture boards commonly used in developed countries abroad (there are no large core boards, eco-boards and multi-layer boards abroad, and the amount of logs is very small), so the investment threshold is relatively high, so some well-known large board enterprises have emerged, and the environmental protection indicators of these large enterprises are very stable. For furniture brands, this is the core purchase index. Eco-board is not an industry encouraged by the state at all. Multilayer board, formerly known as plywood, is mainly used for outer packaging, building templates, partition walls and so on because of its waterproof performance and strength. There are not many well-known brands at all, and most of the glue used in small board factories is urea-formaldehyde glue, which has unstable performance. In fact, we have written it many times. The environmental protection of the plate has nothing to do with the name of the plate, but with the brand and environmental protection degree of the plate. We have also done many experiments.

Level of multilayer board (don't listen to the manufacturer)

Need to use multi-layer board to develop bath cabinets and some wallboard, went to Chongqing market to find, but none.

E0

The spot of I-class multilayer board needs to be customized when necessary, which can achieve stability.

E 1

Level (detected several times in.

0.7- 1

, do not open.

1) is already expensive.

So,

For big brands, there are more environmental protection boards. Why not choose them?

They don't need to fool customers to sell products.

3、

Production performance. Particleboard and density board are accurate in size and compact in interior, which is convenient for large-scale mechanized electric control production. However, the dimensional accuracy of the eco-board multilayer board is not enough, especially the interior of the eco-board is not dense, so good equipment is not used at all, and it is only suitable for some poor equipment and on-site construction (generally, the on-site construction does not use particleboard, but eco-board and knuckle board). At the same time, particleboard does not need surface painting, which saves a lot compared with knuckle board.

4、

Cost. Under the same environmental protection index, the cost of eco-board and multi-layer board is higher than that of granular board, but note that,

I'm talking about the same environmental protection index, not that the particleboard of famous brands such as Lushuihe and Daya is cheaper than the eco-board or multi-layer board used in small factories now (because this is not the same environmental protection index at all).

. Then, brand manufacturers are professionals, and there will be no situation where they only buy expensive ones and don't buy the right ones. No matter physical performance, production performance and environmental protection performance are better, why not use cheaper ones?

Well, it's actually very simple, which is why the cabinets of big brands basically choose particleboard. Of course, because the particle board can't be molded, most of their modeling doors are MDF and solid wood logs.

Mind you,

I'm not saying that all particle boards are good. Be sure to buy those big brands of particleboard, and be sure to identify the authenticity (there are many fakes). The quality of particleboard and fake particleboard in small factories is very poor.

So, why do small factories like to use eco-boards and multi-layer boards? It's actually very simple:

In fact, the production cost of big brands with the same configuration is lower than that of small factories. Their purchasing cost and mechanized production cost are low, but what is expensive is only channel cost, brand cost, service cost and operating cost. Because of the purchase cost and production cost, it is impossible for small factories to completely follow suit. For example, if we don't go into the mall and have no deduction points, the service cost will actually be more. If that small factory is completely configured like us (not just the cabinet board) and it is genuine.

5%

In this gap, customers generally do not choose.

Then, there are only two choices, sell at a low price and make money. The first is to make fake brand-name particleboard, which has certain risks.

The second is to recommend the boards that are not used by big brands and carry out misplaced operations.

. Let customers have no way to compare, even if this kind of plate looks better than particleboard and MDF in appearance, it will have a selling point.

I'm just talking about a knowledge from the perspective of technology and data. Welcome to correct me from the technical data. The rest is boring. In fact, the best way is that we take some well-known brands of granular board cabinets and some small factories of eco-board multi-board cabinets for environmental testing. Hehe, I can sit in the village.

1 compensation

3。

If the environmental protection of well-known brands of particle board cabinets is lower than that of small factories, I will pay the bill.

Three times. I won't accept it until it is higher.

1。