Installation method of hanging plate of boss range hood

The hanging plate of boss range hood is a simple and convenient installation method. Fix the hanging board on the wall, and then hang the range hood on the hanging board. Here is a detailed introduction to the installation method of the hanging plate of the boss range hood:

1. Prepare tools and materials

The tools needed to install the hanging plate of the boss range hood are: electric drill, screwdriver, ruler, pencil, hammer, wrench, discharger, etc. Materials required for installation are: hanging plate, expansion bolt or self-tapping screw, gasket and screw.

2. Find the installation position of the hanging plate.

First of all, we need to find the installation position of the range hood, and determine the size of the hanging plate according to the size and shape of the range hood. Then, use a pencil and ruler to draw a horizontal line and a center line at the position of the hanging plate above the range hood. According to the horizontal line and the center line, determine the up and down, left and right position and direction of the hanging board.

3. Install the hanging plate

Fix the hanging plate on the wall with an electric drill and expansion nut or tapping screw, and check whether it is level with a level meter. When fixing the hanging board, pay attention to that the four corners of the hanging board should be on the same horizontal plane, and use gaskets to protect the wall from damage.

Install range hood

Hang the range hood on the hanging board, and then fix the range hood on the hanging board with screws. When fixing the range hood, pay attention to the length and tightness of the fixing screws to ensure that the range hood is installed firmly.

5. Install the air duct

According to the position of the exhaust outlet of the range hood, select an appropriate air duct, install the air duct on the exhaust outlet of the range hood, and connect the other end with the wall. In the process of connection, attention should be paid to the tightness of each connection port to avoid oil fume leakage.

6. Debugging and testing

After installation, debugging and testing are needed to confirm the normal operation of the range hood. During the test, you can use a lighter or * to check whether the suction and exhaust effect of the range hood is up to standard.

The above is the introduction of the installation method of the boss's range hood hanging plate. Pay attention to safety during installation, and choose appropriate hanging plates and air ducts to ensure the tightness of range hoods and air ducts.