How much does it cost to start a large inkjet printing company?

1, a large inkjet printer with high speed and high precision and a 3.2-meter shelf is a little more than100000, and the economical one can buy more than 70000. \x0d\2。 There are more than 90,000 photo printers with indoor water content1.6m, and weak solvent 10000 to 20,000. (Five Teng or Three Muqi, Epson 55th generation) \x0d\3. The prices of plastic suction machines are different, but they are not expensive. You need a high-power and high-speed engraving machine, you don't need to buy a very good one, it's better to be 1.2m x 2.4m (full board) or above. The laser engraving machine has more than 0.9X 1.2 80W laser tube 3w, but the whole board should be enough. However, the laser can't cut the wood-plastic board, only the mechanical line, and the service life of the laser head can't exceed 1000 hours (one or two thousand yuan each). \x0d\4。 There are many computers with different configurations. You don't have to buy a high-end computer, just enough, but the accessories must be easy to use and stable. There are also some network accessories, peritoneal machines and other supporting equipment. \ x0d \ 5,300,000 is a bit small, and 25 people (5 designs) is a bit slow. Might as well put more. \ x0d \ 6,300 square meters, it is recommended not to dry the plastic light box, which is a little small and the workmanship is too dirty, so it will be necessary to cut the MDF all day, which will affect the photo taking. \x0d\7。 It is recommended not to buy a domestic photo machine. If you want to be big, use imported ones. Hewlett-Packard is not bad, but the cost is higher, but the machine is cheap and Canon is too high-end. It's too expensive to import large inkjet printers, so buy domestic brands.