How to color marble marble marble marble glue?

When marble glue is used, different colors of marble glue can be prepared by adding color matching materials according to the color of stone. This process is called color matching. The color matching method of marble marble marble marble glue is very simple. First use marble glue+marble glue to adjust the basic color of the stone, and then add color paste or natural toner to adjust the color of the stone. When using marble glue to color, attention should be paid to bright light, clear reference stone, clean and dry stone, and full contrast color matching. Let's see how marble marble marble glue is colored. 1. How many colors does marble glue have?

Marble glue is widely used for stone bonding. Different colors can be matched according to different stone colors, so that the bonding effect is more beautiful. How many colors does marble glue have?

In fact, the color of marble glue is very rich, usually light yellow. During construction, transparent, white, beige, green, red, yellow, black and other colors can be prepared through color matching materials such as color matching paste or natural toner.

Second, how to color marble marble glue?

Marble glue is used to paste marble. According to the color of marble, the appropriate color of marble glue is prepared. There are two main color matching methods in common use:

1, marble glue+toner

According to the principle of pigment tricolor, one is to adjust the basic color close to stone with "marble glue+marble glue"; Then add the corresponding color paste to further find the accurate color. This is a common glue mixing method with the advantage of simple operation. However, because the toner is an artificial pigment and the color is pure, and the stone is a natural material, the color is not so pure, and the toner is too pure. There is a new difference between the adjusted marble glue and the stone itself.

2, marble glue+natural toner

Relatively speaking, the effect of natural toner is better than color paste. Natural toner is a natural material extracted from minerals, which is closer to the natural color of stone. For example, when preparing yellow marble glue, an appropriate amount of iron oxide yellow can be added.

3. What are the key points of marble glue color matching?

1, color matching depends on strong light.

Try to choose sunny, sunny and very natural conditions when mixing colors. Excessive light, shadow and dim light will cause color distortion and affect the color matching effect.

2. The reference stone should be clear and the target should be close to the stone.

When mixing colors, choose the most colors on the stone as the target color; When pouring glue at the joint of dark stone and light stone, the color of light stone is generally chosen as the target color.

3, stone to clean and dry.

After the stone absorbs water or is polluted, it will also lead to color change and cover up its true colors. Therefore, when mixing colors, we must ensure that the stone is clean and dry, revealing its true colors.

4. Choose glue and glue to adjust the main color, and then add color matching materials.

Try to adjust the target color with marble glue and marble glue, and then choose natural toner or toner cream if it cannot be adjusted.

5. Full contrast

Color matching is not achieved overnight. When modulating, we should first do experiments on a small area, constantly compare it with the color of the stone, and test it bit by bit until it is adjusted to the required color. The final color must be determined by the effect that the dried marble glue is closest to the color of the stone. Instead of rushing to determine the color before the marble glue is dry.