How to lead drivers to step on the brakes?

Friends who often take the bus can find that some old drivers will not let you know whether to start or brake. It is a pleasure to ride in this kind of driver's car, but some novice drivers, when driving, not only make passengers uncomfortable, but also waste oil.

It is not unusual to recruit drivers. As long as people have a little status, they will have exclusive drivers to pick them up, so that they can be worthy of their rich status. As we all know, rich people are generous and of course good to drivers, but it is a lady Tao in Fujian who has a net worth of over 100 million yuan and drives an 8 million Rolls-Royce Phantom. She wants to hire a driver with a monthly salary of100000.

The first requirement of being her driver is to keep the brakes steady. By driving smoothly, Ms. Tao means that she can't feel the brakes. Because when braking, she will feel uncomfortable. You know, the Phantom is equipped with a 6.7-liter V 12 engine, which can take off with one foot! Then how can we make the brakes stable?

First of all, we should pay attention to the braking hardware of the car, such as brake disc and water content of brake oil. Our new normal brake disc is generally about 1.5cm thick. If it becomes thinner, the brake will be dangerous. So how do we check that the brake pads are getting thinner? When the brake disc becomes thinner, there will be a creak of iron and iron. Pay attention at this time, check and replace the brake pads.

In addition, there is the problem of brake oil, which should be replaced regularly, because there is a vent hole on the brake oil storage pot, and the air inhaled by the vent hole contains moisture or impurities, which will reduce the ignition point of brake oil and reduce its performance. Generally speaking, if the water content of brake oil reaches 3%, it will have an impact on the braking effect.

How to brake under normal circumstances?

Generally speaking, this concept is relatively broad. For example, when following a car, when the intersection in front is red, the car in front still has a long way to go. Then we can loosen the throttle first and slow down ahead of time. According to the parking position, grasp the speed of the good car and brake slowly to avoid "nodding" when braking!

This will not only make passengers feel uncomfortable, but also reduce fuel consumption.

How to brake uphill and downhill?

Braking on the uphill road is also to slow down the brakes, which is slower than driving on the flat ground, but the speed of releasing the pedal will be faster than that on the flat ground, so as to ensure that the speed will not drop excessively!

Manual gears are prone to inappropriate gears because the speed drops too fast. Too low gear concessions make the body shake, so when braking uphill, pay more attention to the brakes and shift gears as soon as possible!

Downhill braking will be more complicated, not only with the braking system, but also with the engine braking. Downhill, especially long slope, if you use the brakes for a long time, it is easy to cause the brake friction plate to overheat and reduce the braking efficiency!

In order to avoid this situation, you can use a low gear when you get off the bus. Generally, the third gear is enough. Go downhill automatically, don't refuel, keep the speed increasing slowly, and brake to control the speed if necessary!

The road is slippery on rainy days. How to brake?

It's much more cautious to step on the brakes in rainy days than usual. Because when braking, we not only rely on the braking force of the caliper on the brake disc, but also rely on the friction between the tire and the ground.

On the wet road, the grip performance of tires will probably drop by more than 30%, so the braking distance is much longer than usual. Although the ABS of cars are now standard, it still can't change the physical characteristics of the decline of tire grip performance, and the braking distance will still be very long.

Therefore, it is the key to control the speed in rainy days. Try to avoid emergency braking, step on the brakes earlier than usual, and don't step on and slam the direction again to avoid the vehicle getting out of control.

How to brake when cornering?

It is common sense that every driver should slow down when he meets a corner. When you slow down at the corner, you should remember a principle: slow in and fast out. When entering the corner, step on the brakes and gradually slow down the speed.

Give the oil when you get out of the corner and drive away quickly. If you don't slow down in the corner, it is very easy to slip when turning, causing safety accidents.

How to brake in case of emergency?

Perhaps ABS technology was not popularized many years ago, so it is suggested that we should not step on the brakes vigorously.

But it's different now. More than 80% cars are equipped with ABS, so don't worry about the wheel locking. It's important to step on the brakes in case of emergency!

In fact, the most important thing is that the driver can grasp the actual braking distance and stop as long as he wants to brake! Do you belong to an old driver?