How to adjust the electronic control of Songteng?

1. 1. Adjust the strength of the electromagnet: First, open the door and touch two wires of the electromagnet with a thin wire. If the electromagnet is found to emit attractive sound, it means that the electromagnet is working normally. Then, use a screwdriver to rotate the screw on the electromagnet to increase or decrease the attraction of the electromagnet and achieve appropriate strength.

2. Secondly, adjust the position of the door lock: adjust the gap between the door lock and the door frame so that the electromagnet can be locked smoothly, but not too tight or too loose. Turn the knob of the door lock to the locking position, and adjust the elastic screw beside the door lock with a screwdriver to make the knob of the door lock rotate flexibly.

3. Then adjust the trigger sensitivity of the door lock: Under normal circumstances, tap the door on the lock bottom plate with a small tool to see if the lock can be triggered. If not, turn the adjusting screw on the bottom plate of the door lock and gradually adjust it to the appropriate sensitivity.

4. Finally, adjust the power supply voltage and current: 12V or 24V DC power supply is generally used for electric locks. If the power supply voltage is insufficient or too high, it will affect the service life of the lock and need to be gradually adjusted to the appropriate voltage and current.