Which electronic belt scale in Xuzhou is good?

Xuzhou, known as the "weighing instrument capital", can be said to be a relatively concentrated base for the production of electronic belt scales in China. There are many in other places, but not as concentrated as Xuzhou. Basically, they are all the same, and the technical content of the products is the same. Different manufacturers may reduce the input of production costs according to different sales prices, such as using steel and load cells. , but generally will not affect the use. Whether its accuracy can be guaranteed depends mainly on the user's site conditions.

Generally speaking, for basically the same product, the bigger the company, the higher the price, because its management cost is higher. For example, Jiangsu Saimo Group and Xuzhou Sanyuan Series Company (Xuzhou Sanyuan Weighing Technology Co., Ltd., Xuzhou Sanyuan Technology Industry Co., Ltd. and Xuzhou Sanyuan Electric Power Measurement and Control Co., Ltd.) are all established companies with many years of industry experience. These companies are different, some are big and some are small. After the bankruptcy of the former Xuzhou Weighing Factory, many companies of different sizes were established. In fact, the technical strength is similar, but each company develops differently. It can be understood that any order, looking for any company engaged in weighing industry in Xuzhou, can be made, installed and debugged for you, and even used well.

Judge who is the best among them. No product is the best, only better. The basic basis for judging the quality of this product is product quality and service.

As mentioned earlier, the quality of products is similar, and the management departments of large companies are more comprehensive and the relative quality should be better, but many inferior products are not excluded; On the contrary, small companies will have many high-quality products. After all, their business philosophy is different, and small companies may pay more attention to product quality.

In terms of service, electronic belt scales generally need to be installed and debugged by manufacturers on site. There are relatively more service personnel and high-tech service engineers in large companies. Generally speaking, the reputation of big companies will be better. However, there are the following situations: the business volume of large companies is also large, and there may be high-level engineers who are too busy to be handled by some middle-level or low-level engineers; Large companies think that this product is a mature product with low technical content and does not need to arrange high-level engineer services; Because the distance is too far, large companies would rather give up project balance than cooperate with users (this should exist in the industry) and so on. Will lead to a decline in the reputation of large companies, in fact, because the after-sales service is not good. On the contrary, many small companies will have this mentality. No matter how long and difficult the journey is, they must do it well. Thin camels are bigger than horses, and small companies can't afford to pay, even if it is a limited balance. Some small companies have just started, with small business volume or small scale, and there are not so many full-time service technicians. But once they have technicians, they are generally more comprehensive and professional, with a high level of expertise. Many of these talents have not developed in big companies, and there may be many reasons why they are more valuable in small companies. In this way, small companies will have a slight advantage over large companies in service. But small companies are small after all, and generally speaking, bigger companies have no advantage. One thing can be firmly believed: small companies are their own technicians, whether they are recruited temporarily or hired. Now that they have gone to the scene to deal with it, they must not fail. Even if it is for your own face and a little service fee, let the equipment work normally. Some large companies may not be like this. One person can't handle it well, there are others. Anyway, it cost the boss money, which affected the ability of dealing with users and leaders. This is the personal performance of a few irresponsible and unprofessional employees, and he will not consider whether it will affect the company's image.

After all this verbiage, I just want to tell the landlord which one is Xuzhou electronic belt scale? Which is good and which is not, it depends on your understanding. Absolutely good, not to mention this industry, other industries may not be able to find a perfect company, nor can they be absolutely bad. Users only need to understand dialectically. Of course, we have to use it in the end to know whose is better.