There will be some bubbles in the car clothes just after they are pasted. How can these bubbles disappear?

Many friends will find that there are some bubbles in the stealth car clothes just after they are pasted, which is very unsightly, but the most important thing is that the driver is worried that such bubbles will not be used in the future, endangering the service life of the stealth car clothes. Many film shops think that basking in the sun or driving back for processing is enough, but is this really the case?

There are two kinds of bubbles, one is a real bubble, and the other is a small bubble, but the solutions are different. As the film shop said, it disappears after soaking dry, mainly because the residual gas will fade after two days after the water in the invisible car clothes is cleaned. But if it is a small blister, it is that someone did not keep it clean during the construction process. In this case, it is difficult to volatilize in a water-tight environment, and the adhesive of invisible car clothes is diluted for a long time, which is prone to glue opening.

If there are several small blisters in a large area, it is a mistake in the construction of the film shop, and you have the right to ask the film shop to disassemble and replace the invisible car clothes. However, if there are many bubbles occasionally in a few areas, such a thing can be discussed with the film shop. After all, there will inevitably be a little water in such a large area of the car body, and you have the right to ask the film shop to help solve it. The treatment method is generally to puncture the area with small blisters with a needle to drive out the water. Because the pinhole is not big, so

But at this time, it should be noted that if the three-in-one technology invisible car clothing maintenance liquid is applied on it for maintenance, because such technology maintenance liquid can produce a sealing layer, which can block the external etching, otherwise some dirt will dye all the glue along the pinhole without any sealing layer protection, which will still lead to the deterioration of super glue and other glue opening situations. It will be more troublesome to deal with it at that time. Tear the invisible car clothes and remove the glue marks. If the glue goes bad, you can't remove the glue mark and polish it, but it will hurt the paint. Of course, if the small blisters are solved, we must use the three-in-one technology to hide the car clothing maintenance liquid, produce a sealing layer and carry out regular maintenance.

Sticking the invisible car clothes naturally chooses a regular shop with rich experience in engineering construction. These things will be prevented, and the protection that should help you will be guaranteed.