How to find someone to process gambling jadeite, and how to find someone to process jadeite raw stone?

1, jade rough stone processing generally goes to the jade market to find a processing place. This processing method is generally only suitable for small batches, and the price is calculated by water carving. However, if you have a large number of jadeite rough stones or have a high processing demand, you will generally go to the jadeite processing plant. The famous jadeite processing sites in China are generally in Guangzhou, Jieyang, Sihui, Pingzhou in Guangdong and Tengchong in Yunnan. There are many jadeite original stone processing plants.

2. Processed jadeite Generally speaking, the better the texture of the jadeite original stone, the higher the processing cost, because the master should be more careful and patient when carving the jadeite original stone with relatively good texture, and the cost will naturally be high. The processing cost depends on the fineness of the process to complete the jadeite raw stone. Generally speaking, consumers may pay a deposit first, and the final payment depends on the sculptor after the finished product, and then decide the total processing cost of the original jade stone.

3. No matter what kind of jadeite stone it is, the final processing effect is not only limited by the quality of jadeite itself, but also very important to meet a good sculptor. A sculptor with a certain reputation and superb skills will inevitably have a higher manual price, so the cost of processing jadeite stone will naturally be higher.

4, processing is usually based on its characteristics, the size, shape and value of the original jade stone to determine what products to make, and so on, so that jade materials can achieve the highest economic benefits. If the material is not selected properly, it will cause material waste and economic loss. Secondly, the original jadeite stone is cut according to the required size. In the process of cutting, cracks and serious flaws must be avoided, and the most essential parts must be reserved to make different kinds of jade ornaments.

5. Design and carve the cut jadeite stone. Jade design is very different from general product design. Jade design is to draw design drawings directly on the jade material on the basis of looking at the material. It draws a composition line on the prototype with an oil-based pen, and grinds off the redundant parts according to the composition line to carve the general shape of the jade for further carving work. Finally, through certain technological operations, the traces of the jade surface are removed, so that the jade surface can reach its own luster and smoothness. The quality of polishing process determines the final luster of jade, which has a great influence on the appearance of jade products.