How about Anji Ceramics?

Question 1: Have you ever used Anki Ceramics products? How is the quality? My home was laid with Anji ceramic tiles in 2004, but now it's been ten years and it's still as bright as new, which is pretty good. At my uncle's house downstairs where we laid the bricks together, they used off-brand bricks, which had long since become rotten and damaged. The whole room was gray and dusty when we walked in, unlike my house which was bright and bright when we walked in! Now my uncle is decorating his new house, and he also ordered Anki tiles

Question 2: What is the quality of Anki tiles? There are good and bad tiles. Each brand of tiles basically has several different grades of tiles. , in order to help you identify and evaluate the quality of ceramic tiles, it is recommended that you refer to the following principles:

1. When choosing ceramic tiles, you must inquire clearly about the grade of ceramic tiles (Grade AA), Grade A Grade products (Grade A), qualified products) try to choose the best products here.

2. Pay attention to the appearance of ceramic tiles. Good ceramic tiles should have no defects such as bumps, bulges, and warped corners. They should have straight edges and flat surfaces, and no cracks, damage, defects, or impurities attached to the surface.

3. Look at the glaze of the ceramic tiles. The surface should be uniform, flat, smooth, bright and consistent in color. (If there are particles on the surface of the tiles, not smooth, different colors, uneven thickness, or even uneven concave and convex, it is a bad product)

4. Look at the copywriting, good tiles have clear patterns and colors, and no unevenness. Obvious color leakage, misalignment, disconnection or different shades.

5. Look at the hardness. Ceramic tiles have good hardness, strong toughness, not easily broken, and good density.

6. To absorb water, you can drop water on the surface of the ceramic tile to see how quickly it spreads and infiltrates. The slower it absorbs water, the density of the ceramic tile is high. On the contrary, the faster it absorbs water, the density is sparse, and its intrinsic quality The former is better.

7. Listen to the sound and hang it down easily with your fingers. If the sound is clear and pleasant, it is a high quality. If the sound is dull, it is a low quality.

With the above standards, no matter what kind of tiles you are facing, we can help you identify them.

I hope the above answers can solve your questions in time.

Question 3: What is the quality of Anki Ceramics? Not bad, this is what I use at home, and as far as I know, more people use it.

Question 4: How about Guangdong Anji ceramic tiles? Anji ceramics is an old brand in Foshan. Its quality is outstanding, and its cost-effectiveness is one of the best in the industry.

Question 5: How about Foshan Anji Ceramics? Anji Ceramics is an old brand in Foshan. Its quality is outstanding, and its cost-effectiveness is one of the best in the industry.

Question 6: Are Anji ceramic tiles good? You must buy ceramic tiles when decorating your home. There is also a certain amount of knowledge on how to buy ceramic tiles that are good value for money and satisfactory. Generally speaking, the principles of purchasing ceramic tiles are It is: one look, two listens, three drops of water, four feet of measurement.

1. Look at the appearance. The color of the ceramic tiles should be uniform, the surface finish and flatness should be good, the perimeter should be regular, and the pattern should be complete. Take four or five pieces out of a box and inspect them for defects such as color difference, deformation, missing edges and corners.

2. Listen to the sound. If you tap it lightly with a hard object, the crisper the sound, the higher the degree of porcelain and the better the quality. You can also hold the corner of the ceramic tile between your left thumb, index finger and middle finger, hang it down easily, and tap the middle and lower part of the ceramic tile with your right index finger. If the sound is clear and pleasant, it is a high-quality sound; if the sound is dull and turbid, it is a low-quality sound.

3. Dripping test. You can drop water on the back of the tile to see how quickly the water soaks after it spreads. Generally speaking, the slower the water absorption is, the greater the density of the tile is; conversely, the faster the water absorption is, the density is sparse, and the former is the better intrinsic quality.

4. Measure with a ruler. The higher the accuracy of the side length of the ceramic tiles, the better the effect after paving. Buying high-quality ceramic tiles is not only easier to construct, but also saves man-hours and auxiliary materials. Use a tape measure to measure the size of each tile and see if there is any difference around it. The one with the highest accuracy is the best.

In addition, observe its hardness. Ceramic tiles have good hardness, strong toughness and are not easily broken. Use the edges and corners of the tile fragments to scratch each other, and observe whether the fractures of the damaged fragments are fine or loose, hard, brittle, or soft, leaving scratches or scattered powder. If it belongs to the former, it is of high quality, and if it is the latter, it is of high quality. Difference.

Whether the size is standard is the key to judging the quality of the tiles. Use a tape measure or caliper to measure the diagonal and four-sided dimensions of the tiles and whether the thickness is uniform. The crisp sound of good tiles indicates the porcelain content. high.

If the sound of "tacking" has a cracking sound, it means there are cracks in the bricks.

Good tiles are easy to install and the installation results are standard.

Question 7: Is the quality of ANGI Ceramics good? The quality of Anji Ceramics is not bad. It is an old brand in Foshan and has a large factory.

Question 8: Is the quality of Anji ceramic tiles good? Can. If you're not lucky with this brand you can look it up online. Are there five steps? Look, listen, listen and listen. Four or five?

Question 9: Which one is better, Anji Ceramics or Changan Ceramics? There are not many on the market