How much does it cost to fuse a core optical fiber? What is the starting price of optical fiber fusion core?

With the development of science and technology, every household now needs to use network and optical fiber. Many people are more concerned about how much it costs to fuse a core optical fiber. The price of optical fiber welding is different in different cities, but before installation? We also need to know how much it costs to fuse an optical fiber core. What is the starting price of optical fiber fusion core? Only by knowing them can we make the right choice.

So today, the small series of the network will take you to find out.

The first thing we need to do is to clean the cutter and adjust its position. The tool should be placed smoothly. When cutting, the action should be natural and smooth, and no should be heavy and urgent to avoid chamfering, burr, broken fiber, fish and other bad end faces.

In addition, when learning to "play the piano", we should flexibly use the fingers of the right hand to make them correspond and coordinate with all parts of the cutter, so as to improve the speed and quality of the cutter.

Key parameters, such as fiber material and type, optimal premelting current and time, and fiber input, should be clearly seen before fiber welding.

When welding, V-groove, electrode, objective lens, welding chamber, etc. Welding machine should be cleaned in time, whether there are bubbles, too thin, too thick, virtual melting, separation and other undesirable phenomena. Check in time during welding. Pay attention to the monitoring results of optical time domain reflectometer, find the causes of the above adverse reactions in time, and take corresponding improvement measures.

If there is obvious virtual melting phenomenon for many times, check whether the materials and models of the two optical fibers match, whether the tool and welding machine are polluted by dust, and check the oxidation state of the electrode. If there is no problem, the welding current should be increased appropriately.

Beijing: 15-20 yuan 1 min. Shanghai: starting price 10 yuan/Guangzhou: starting price 10 yuan/Zhejiang: starting price 10 yuan/Jinan: big cities will weld a core province of 8 yuan/kloc. About 500 points 10 yuan, dozens of minutes, Nantong, 30 yuan: generally low 12- 15 yuan, and about 20 yuan: Yunnan: 15 yuan/core starting price: Dalian: starting price 10 yuan/core: Dongguan.

At this point, you need to put the knife in a stable place. When cutting, the action needs to be very natural and stable, and there can be no bevel, burr, broken fiber, etc. , are all bad end faces.

You need to use the fingers of your right hand flexibly to cooperate with all parts of the tool, which is also to improve the cutting speed and quality.

When welding, do something. Check whether there are any bad phenomena such as bubbles, too thin, too thick and virtual melting during welding, and pay attention to the tracking and monitoring results of optical time domain reflectometer, so as to find some bad reactions in monitoring in time and take certain improvement measures to improve them.

I hope that the above contents of optical fiber fusion core can bring substantial help to everyone, and thank you very much for your trust in Bian Xiao.

Want to know more about home, decoration knowledge, decoration quotation, please pay attention to Dalian decoration network comparison, thank you for your support!